Vinyl Fence Cost in Richmond, VA (2026)

HomeFencingVirginia › Richmond
Vinyl Fence Cost in Richmond, VA (2026)
BLS OEWS 2025 wage data · updated August 2026
Richmond · per linear ft
$26.59 – $56.98

Vinyl Fence costs $26.59 to $56.98 per linear ft in Richmond in 2026. For a 150-foot run, expect $3,988 – $8,547 installed, typically near $6,268. That is essentially in line with the Virginia average.

Typical linear ft
$41.78
vs state average
In line
Local construction wage
$27.67
Frost depth
18 in

Richmond vinyl fence calculator

Estimated installed cost

Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.

How Richmond compares with the rest of Virginia

Construction wages in Richmond average $27.67 per hour against $28.67 statewide, so pricing tracks the Virginia norm closely.

Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.

Vinyl Fence cost by project size in Richmond

Project sizeRichmond rangeTypical
50 ft$1,329 – $2,849$2,089
100 ft$2,659 – $5,698$4,178
150 ft$3,988 – $8,547$6,268
200 ft$5,318 – $11,396$8,357
250 ft$6,647 – $14,245$10,446
300 ft$7,977 – $17,093$12,535
400 ft$10,636 – $22,791$16,714
500 ft$13,295 – $28,489$20,892

Where the money goes

For a 150-foot run in Richmond at roughly $6,268, a typical bill splits like this:

Line itemShareCost
Labor42%$2,632
Materials44%$2,758
Site prep & equipment8%$501
Overhead, disposal & finishing6%$376

Richmond compared with other Virginia markets

AreaCost per linear ftvs Richmond
Virginia Beach$26.66 – $57.140%
Roanoke$25.69 – $55.05−3%
Charlottesville$26.81 – $57.46+1%
Lynchburg$25.68 – $55.02−3%
Virginia average$26.97 – $57.78+1%

Ground conditions and code in Richmond

Richmond sits in IECC zone 4 (mixed) with a design frost depth of about 18 inches. Footings and posts must extend below that line, which adds excavation depth and concrete volume that warm-climate estimates leave out.

Permits in Richmond

A residential permit for this work typically runs around $450 in Virginia. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Richmond building department before work begins.

Hiring in Richmond

Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Virginia.

Frequently asked questions

How much does vinyl fence cost in Richmond?

In 2026, vinyl fence costs $26.59 to $56.98 per linear ft in Richmond. For a 150-foot run, the installed total typically lands between $3,988 and $8,547.

Is Richmond more expensive than the rest of Virginia?

Not meaningfully. Richmond prices track the Virginia average closely.

Do I need a permit in Richmond?

Most work of this type and value requires a permit. Budget around $450 in Virginia and allow extra time for review in metro jurisdictions.

How do I compare quotes in Richmond?

Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.

Nearby markets

Open the full vinyl fence calculator →

Methodology. Local pricing applies the Richmond construction wage from the BLS Occupational Employment and Wage Statistics (2025 release, $27.67/hr) to the labor share of a national 2026 cost baseline. Materials are held at national prices. Figures refresh automatically with each BLS release. Planning estimates, not quotes. See our full methodology.

Leave a Comment