Vinyl Fence costs $26.81 to $57.46 per linear ft in Charlottesville in 2026. For a 150-foot run, expect $4,022 – $8,619 installed, typically near $6,321. That is essentially in line with the Virginia average.
Charlottesville vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Charlottesville compares with the rest of Virginia
Construction wages in Charlottesville average $28.28 per hour against $28.67 statewide, so pricing tracks the Virginia norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Charlottesville
| Project size | Charlottesville range | Typical |
|---|---|---|
| 50 ft | $1,341 – $2,873 | $2,107 |
| 100 ft | $2,681 – $5,746 | $4,214 |
| 150 ft | $4,022 – $8,619 | $6,321 |
| 200 ft | $5,363 – $11,492 | $8,428 |
| 250 ft | $6,704 – $14,365 | $10,534 |
| 300 ft | $8,044 – $17,238 | $12,641 |
| 400 ft | $10,726 – $22,984 | $16,855 |
| 500 ft | $13,407 – $28,730 | $21,069 |
Where the money goes
For a 150-foot run in Charlottesville at roughly $6,321, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,655 |
| Materials | 44% | $2,781 |
| Site prep & equipment | 8% | $506 |
| Overhead, disposal & finishing | 6% | $379 |
Charlottesville compared with other Virginia markets
| Area | Cost per linear ft | vs Charlottesville |
|---|---|---|
| Virginia Beach | $26.66 – $57.14 | −1% |
| Richmond | $26.59 – $56.98 | −1% |
| Roanoke | $25.69 – $55.05 | −4% |
| Lynchburg | $25.68 – $55.02 | −4% |
| Virginia average | $26.97 – $57.78 | +1% |
Ground conditions and code in Charlottesville
Permits in Charlottesville
A residential permit for this work typically runs around $450 in Virginia. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Charlottesville building department before work begins.
Hiring in Charlottesville
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Virginia.
Frequently asked questions
How much does vinyl fence cost in Charlottesville?
In 2026, vinyl fence costs $26.81 to $57.46 per linear ft in Charlottesville. For a 150-foot run, the installed total typically lands between $4,022 and $8,619.
Is Charlottesville more expensive than the rest of Virginia?
Not meaningfully. Charlottesville prices track the Virginia average closely.
Do I need a permit in Charlottesville?
Most work of this type and value requires a permit. Budget around $450 in Virginia and allow extra time for review in metro jurisdictions.
How do I compare quotes in Charlottesville?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →