Vinyl Fence costs $25.69 to $55.05 per linear ft in Huntsville in 2026. For a 150-foot run, expect $3,853 – $8,257 installed, typically near $6,055. That is essentially in line with the Alabama average.
Huntsville vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Huntsville compares with the rest of Alabama
Construction wages in Huntsville average $25.24 per hour against $24.82 statewide, so pricing tracks the Alabama norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Huntsville
| Project size | Huntsville range | Typical |
|---|---|---|
| 50 ft | $1,284 – $2,752 | $2,018 |
| 100 ft | $2,569 – $5,505 | $4,037 |
| 150 ft | $3,853 – $8,257 | $6,055 |
| 200 ft | $5,138 – $11,009 | $8,073 |
| 250 ft | $6,422 – $13,762 | $10,092 |
| 300 ft | $7,707 – $16,514 | $12,110 |
| 400 ft | $10,275 – $22,019 | $16,147 |
| 500 ft | $12,844 – $27,523 | $20,184 |
Where the money goes
For a 150-foot run in Huntsville at roughly $6,055, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,543 |
| Materials | 44% | $2,664 |
| Site prep & equipment | 8% | $484 |
| Overhead, disposal & finishing | 6% | $363 |
Huntsville compared with other Alabama markets
| Area | Cost per linear ft | vs Huntsville |
|---|---|---|
| Birmingham | $26.09 – $55.90 | +2% |
| Mobile | $25.63 – $54.93 | 0% |
| Tuscaloosa | $25.86 – $55.40 | +1% |
| Montgomery | $25.19 – $53.97 | −2% |
| Alabama average | $25.53 – $54.71 | −1% |
Ground conditions and code in Huntsville
Permits in Huntsville
A residential permit for this work typically runs around $350 in Alabama. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Huntsville building department before work begins.
Hiring in Huntsville
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Alabama.
Frequently asked questions
How much does vinyl fence cost in Huntsville?
In 2026, vinyl fence costs $25.69 to $55.05 per linear ft in Huntsville. For a 150-foot run, the installed total typically lands between $3,853 and $8,257.
Is Huntsville more expensive than the rest of Alabama?
Not meaningfully. Huntsville prices track the Alabama average closely.
Do I need a permit in Huntsville?
Most work of this type and value requires a permit. Budget around $350 in Alabama and allow extra time for review in metro jurisdictions.
How do I compare quotes in Huntsville?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →