Vinyl Fence costs $26.09 to $55.90 per linear ft in Birmingham in 2026. For a 150-foot run, expect $3,913 – $8,385 installed, typically near $6,149. That is about 2% above the Alabama average.
Birmingham vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Birmingham runs above the Alabama average
Construction wages in Birmingham average $26.32 per hour against $24.82 statewide, so labor-heavy work prices above the Alabama norm here.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Birmingham
| Project size | Birmingham range | Typical |
|---|---|---|
| 50 ft | $1,304 – $2,795 | $2,050 |
| 100 ft | $2,609 – $5,590 | $4,100 |
| 150 ft | $3,913 – $8,385 | $6,149 |
| 200 ft | $5,218 – $11,180 | $8,199 |
| 250 ft | $6,522 – $13,976 | $10,249 |
| 300 ft | $7,826 – $16,771 | $12,299 |
| 400 ft | $10,435 – $22,361 | $16,398 |
| 500 ft | $13,044 – $27,951 | $20,498 |
Where the money goes
For a 150-foot run in Birmingham at roughly $6,149, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,583 |
| Materials | 44% | $2,706 |
| Site prep & equipment | 8% | $492 |
| Overhead, disposal & finishing | 6% | $369 |
Birmingham compared with other Alabama markets
| Area | Cost per linear ft | vs Birmingham |
|---|---|---|
| Mobile | $25.63 – $54.93 | −2% |
| Huntsville | $25.69 – $55.05 | −2% |
| Tuscaloosa | $25.86 – $55.40 | −1% |
| Montgomery | $25.19 – $53.97 | −3% |
| Alabama average | $25.53 – $54.71 | −2% |
Ground conditions and code in Birmingham
Permits in Birmingham
A residential permit for this work typically runs around $350 in Alabama. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Birmingham building department before work begins.
Hiring in Birmingham
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Alabama.
Frequently asked questions
How much does vinyl fence cost in Birmingham?
In 2026, vinyl fence costs $26.09 to $55.90 per linear ft in Birmingham. For a 150-foot run, the installed total typically lands between $3,913 and $8,385.
Is Birmingham more expensive than the rest of Alabama?
Yes. Birmingham runs about 2% above the Alabama average, because local construction wages ($26.32/hr) sit above the statewide figure of $24.82/hr.
Do I need a permit in Birmingham?
Most work of this type and value requires a permit. Budget around $350 in Alabama and allow extra time for review in metro jurisdictions.
How do I compare quotes in Birmingham?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →