Stamped Concrete costs $11.64 to $25.08 per sq ft in Hattiesburg in 2026. For a 400 sq ft project, expect $4,656 – $10,032 installed, typically near $7,344. That is essentially in line with the Mississippi state average.
Hattiesburg stamped concrete calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Hattiesburg costs more than the rest of Mississippi
Hattiesburg carries essentially the same rate as the Mississippi statewide figure. Wages, permitting, and site access here track close to the statewide norm, so the premium metro buyers often pay elsewhere is much smaller in Hattiesburg.
Statewide, Mississippi averages $11.64 to $25.08 per sq ft, against $11.64 to $25.08 inside Hattiesburg. Suburbs on the metro fringe usually fall between the two.
Stamped Concrete cost by project size in Hattiesburg
| Project size | Hattiesburg range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $1,164 – $2,508 | $1,836 |
| 12×12 (144 sq ft) | $1,677 – $3,611 | $2,644 |
| 12×16 (192 sq ft) | $2,235 – $4,815 | $3,525 |
| 16×20 (320 sq ft) | $3,726 – $8,025 | $5,875 |
| 20×20 (400 sq ft) | $4,657 – $10,031 | $7,344 |
| 24×24 (576 sq ft) | $6,706 – $14,444 | $10,575 |
| 30×40 (1,200 sq ft) | $13,971 – $30,092 | $22,032 |
Where the money actually goes
For a 400 sq ft project in Hattiesburg at roughly $7,344, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 58% | $4,259 |
| Materials | 32% | $2,313 |
| Site prep & equipment | 6% | $463 |
| Overhead, disposal & finishing | 4% | $308 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting preparation, not a genuine bargain.
Hattiesburg compared with other Mississippi markets
| Area | Cost per sq ft | vs Hattiesburg |
|---|---|---|
| Jackson | $12.22 – $26.33 | +5% |
| Gulfport | $11.99 – $25.83 | +3% |
| Mississippi average | $11.64 – $25.08 | 0% |
Frost depth and code requirements in Hattiesburg
Permits in Hattiesburg
A residential permit for this work typically runs around $250 in Mississippi, and metro jurisdictions like Hattiesburg usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Hattiesburg building department before work begins.
Hiring in Hattiesburg
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same scope and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in Mississippi.
Frequently asked questions
How much does stamped concrete cost in Hattiesburg?
In 2026, stamped concrete costs $11.64 to $25.08 per sq ft in Hattiesburg. For a 400 sq ft project, the installed total typically lands between $4,656 and $10,032.
Is Hattiesburg more expensive than the rest of Mississippi?
Not meaningfully. Hattiesburg prices essentially in line with the Mississippi statewide average.
Do I need a permit in Hattiesburg?
Most work of this type and value requires a permit. Budget around $250 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Hattiesburg?
Insist on three written, itemised quotes covering identical scope, materials, and preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full stamped concrete calculator →