Stamped Concrete costs $12.70 to $27.36 per sq ft in Cheyenne in 2026. For a 400 sq ft project, expect $5,081 – $10,943 installed, typically near $8,012. That is essentially in line with the Wyoming average.
Cheyenne stamped concrete calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Cheyenne compares with the rest of Wyoming
Construction wages in Cheyenne average $30.17 per hour against $30.86 statewide, so pricing tracks the Wyoming norm closely.
Labor is about 58% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Stamped Concrete cost by project size in Cheyenne
| Project size | Cheyenne range | Typical |
|---|---|---|
| 100 sq ft | $1,270 – $2,736 | $2,003 |
| 200 sq ft | $2,540 – $5,471 | $4,006 |
| 300 sq ft | $3,810 – $8,207 | $6,009 |
| 400 sq ft | $5,081 – $10,943 | $8,012 |
| 600 sq ft | $7,621 – $16,414 | $12,017 |
| 800 sq ft | $10,161 – $21,885 | $16,023 |
| 1,000 sq ft | $12,701 – $27,357 | $20,029 |
| 1,500 sq ft | $19,052 – $41,035 | $30,044 |
Where the money goes
For a 400 sq ft project in Cheyenne at roughly $8,012, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 58% | $4,647 |
| Materials | 28% | $2,243 |
| Site prep & equipment | 8% | $641 |
| Overhead, disposal & finishing | 6% | $481 |
Cheyenne compared with other Wyoming markets
| Area | Cost per sq ft | vs Cheyenne |
|---|---|---|
| Western Wyoming nonmetropolitan area | $12.89 – $27.76 | +1% |
| Eastern Wyoming nonmetropolitan area | $13.03 – $28.07 | +3% |
| Casper | $12.41 – $26.73 | −2% |
| Wyoming average | $12.86 – $27.71 | +1% |
Ground conditions and code in Cheyenne
Permits in Cheyenne
A residential permit for this work typically runs around $300 in Wyoming. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Cheyenne building department before work begins.
Hiring in Cheyenne
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Wyoming.
Frequently asked questions
How much does stamped concrete cost in Cheyenne?
In 2026, stamped concrete costs $12.70 to $27.36 per sq ft in Cheyenne. For a 400 sq ft project, the installed total typically lands between $5,081 and $10,943.
Is Cheyenne more expensive than the rest of Wyoming?
Not meaningfully. Cheyenne prices track the Wyoming average closely.
Do I need a permit in Cheyenne?
Most work of this type and value requires a permit. Budget around $300 in Wyoming and allow extra time for review in metro jurisdictions.
How do I compare quotes in Cheyenne?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full stamped concrete calculator →