Privacy Fence costs $24.88 to $59.70 per linear ft in Grand Forks in 2026. For a 150-foot run, expect $3,731 – $8,955 installed, typically near $6,343. That is about 0% above the North Dakota state average.
Grand Forks privacy fence cost calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Grand Forks costs more than the rest of North Dakota
Grand Forks carries roughly a 0% premium over the North Dakota statewide figure. Three things drive that gap. Metro wages run above the state average, and labor is about 50% of this bill. Permitting and inspection are slower and more expensive inside city limits. And site access is tighter, which means smaller equipment, more hand work, and sometimes street permits for deliveries.
Statewide, North Dakota averages $24.88 to $59.70 per linear ft, against $24.88 to $59.70 inside Grand Forks. Suburbs on the metro fringe usually fall between the two.
Privacy Fence cost by project size in Grand Forks
| Project size | Grand Forks range | Typical |
|---|---|---|
| 50 ft | $1,244 – $2,985 | $2,114 |
| 100 ft | $2,488 – $5,970 | $4,229 |
| 150 ft | $3,731 – $8,955 | $6,343 |
| 200 ft | $4,975 – $11,940 | $8,458 |
| 250 ft | $6,219 – $14,925 | $10,572 |
| 300 ft | $7,463 – $17,910 | $12,686 |
| 400 ft | $9,950 – $23,880 | $16,915 |
| 500 ft | $12,438 – $29,850 | $21,144 |
Grand Forks compared with other North Dakota markets
| Area | Cost per linear ft | vs Grand Forks |
|---|---|---|
| Fargo | $26.12 – $62.69 | +5% |
| Bismarck | $25.37 – $60.89 | +2% |
| North Dakota average | $24.88 – $59.70 | same |
Ground conditions and code in Grand Forks
Permits in Grand Forks
A residential permit for this work typically runs around $300 in North Dakota, and metro jurisdictions like Grand Forks usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Grand Forks building department before work begins.
Hiring in Grand Forks
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same dimensions and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in North Dakota.
Frequently asked questions
How much does privacy fence cost in Grand Forks?
In 2026, privacy fence costs $24.88 to $59.70 per linear ft in Grand Forks. For a 150-foot run, the installed total typically lands between $3,731 and $8,955.
Is Grand Forks more expensive than the rest of North Dakota?
Yes. Grand Forks runs about 0% above the North Dakota statewide average, driven by metro wage levels, permitting, and tighter site access.
Do I need a permit in Grand Forks?
Most work of this type and value requires a permit. Budget around $300 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Grand Forks?
Insist on three written, itemised quotes covering identical dimensions, materials, and scope of preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full privacy fence calculator →