Privacy Fence costs $27.55 to $66.12 per linear ft in Minneapolis in 2026. For a 150-foot run, expect $4,133 – $9,918 installed, typically near $7,025. That is about 3% above the Minnesota average.
Minneapolis privacy fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Minneapolis runs above the Minnesota average
Construction wages in Minneapolis average $37.82 per hour against $36.13 statewide, so labor-heavy work prices above the Minnesota norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Privacy Fence cost by project size in Minneapolis
| Project size | Minneapolis range | Typical |
|---|---|---|
| 50 ft | $1,378 – $3,306 | $2,342 |
| 100 ft | $2,755 – $6,612 | $4,684 |
| 150 ft | $4,133 – $9,918 | $7,025 |
| 200 ft | $5,510 – $13,224 | $9,367 |
| 250 ft | $6,888 – $16,530 | $11,709 |
| 300 ft | $8,265 – $19,836 | $14,051 |
| 400 ft | $11,020 – $26,449 | $18,734 |
| 500 ft | $13,775 – $33,061 | $23,418 |
Where the money goes
For a 150-foot run in Minneapolis at roughly $7,025, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,513 |
| Materials | 36% | $2,529 |
| Site prep & equipment | 8% | $562 |
| Overhead, disposal & finishing | 6% | $422 |
Minneapolis compared with other Minnesota markets
| Area | Cost per linear ft | vs Minneapolis |
|---|---|---|
| Duluth | $26.19 – $62.84 | −5% |
| St. Cloud | $26.62 – $63.88 | −3% |
| Rochester | $26.75 – $64.19 | −3% |
| Mankato | $26.27 – $63.05 | −5% |
| Minnesota average | $26.88 – $64.50 | −2% |
Ground conditions and code in Minneapolis
Permits in Minneapolis
A residential permit for this work typically runs around $500 in Minnesota. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Minneapolis building department before work begins.
Hiring in Minneapolis
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Minnesota.
Frequently asked questions
How much does privacy fence cost in Minneapolis?
In 2026, privacy fence costs $27.55 to $66.12 per linear ft in Minneapolis. For a 150-foot run, the installed total typically lands between $4,133 and $9,918.
Is Minneapolis more expensive than the rest of Minnesota?
Yes. Minneapolis runs about 3% above the Minnesota average, because local construction wages ($37.82/hr) sit above the statewide figure of $36.13/hr.
Do I need a permit in Minneapolis?
Most work of this type and value requires a permit. Budget around $500 in Minnesota and allow extra time for review in metro jurisdictions.
How do I compare quotes in Minneapolis?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full privacy fence calculator →