Furnace Installation costs $3,678 to $8,407 in St. Louis in 2026. For an average 1,800 sq ft home, expect $3,678 – $8,407 installed, typically near $6,042. That is about 4% above the Missouri average.
St. Louis furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why St. Louis runs above the Missouri average
Construction wages in St. Louis average $35.43 per hour against $32.49 statewide, so labor-heavy work prices above the Missouri norm here.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in St. Louis
| Project size | St. Louis range | Typical |
|---|---|---|
| 1,000 sq ft home | $2,043 – $4,670 | $3,357 |
| 1,400 sq ft home | $2,861 – $6,538 | $4,700 |
| 1,800 sq ft home | $3,678 – $8,407 | $6,042 |
| 2,200 sq ft home | $4,495 – $10,275 | $7,385 |
| 2,600 sq ft home | $5,312 – $12,143 | $8,728 |
| 3,000 sq ft home | $6,130 – $14,011 | $10,070 |
Where the money goes
For an average 1,800 sq ft home in St. Louis at roughly $6,042, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,417 |
| Materials | 46% | $2,779 |
| Site prep & equipment | 8% | $483 |
| Overhead, disposal & finishing | 6% | $363 |
St. Louis compared with other Missouri markets
| Area | Cost installed | vs St. Louis |
|---|---|---|
| Kansas City | $3,595 – $8,218 | −2% |
| Springfield | $3,409 – $7,791 | −7% |
| Jefferson City | $3,481 – $7,957 | −5% |
| Columbia | $3,423 – $7,824 | −7% |
| Missouri average | $3,548 – $8,109 | −4% |
Climate and equipment sizing in St. Louis
Permits in St. Louis
A residential permit for this work typically runs around $350 in Missouri. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the St. Louis building department before work begins.
Hiring in St. Louis
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Missouri.
Frequently asked questions
How much does furnace installation cost in St. Louis?
In 2026, furnace installation costs $3,678 to $8,407 in St. Louis. For an average 1,800 sq ft home, the installed total typically lands between $3,678 and $8,407.
Is St. Louis more expensive than the rest of Missouri?
Yes. St. Louis runs about 4% above the Missouri average, because local construction wages ($35.43/hr) sit above the statewide figure of $32.49/hr.
Do I need a permit in St. Louis?
Most work of this type and value requires a permit. Budget around $350 in Missouri and allow extra time for review in metro jurisdictions.
How do I compare quotes in St. Louis?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →