Furnace Installation costs $3,165 to $7,234 in Montgomery in 2026. For an average 1,800 sq ft home, expect $3,165 – $7,234 installed, typically near $5,200. That is essentially in line with the Alabama average.
Montgomery furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Montgomery compares with the rest of Alabama
Construction wages in Montgomery average $23.90 per hour against $24.82 statewide, so pricing tracks the Alabama norm closely.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in Montgomery
| Project size | Montgomery range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,758 – $4,019 | $2,889 |
| 1,400 sq ft home | $2,462 – $5,627 | $4,044 |
| 1,800 sq ft home | $3,165 – $7,234 | $5,200 |
| 2,200 sq ft home | $3,868 – $8,842 | $6,355 |
| 2,600 sq ft home | $4,572 – $10,450 | $7,511 |
| 3,000 sq ft home | $5,275 – $12,057 | $8,666 |
Where the money goes
For an average 1,800 sq ft home in Montgomery at roughly $5,200, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,080 |
| Materials | 46% | $2,392 |
| Site prep & equipment | 8% | $416 |
| Overhead, disposal & finishing | 6% | $312 |
Montgomery compared with other Alabama markets
| Area | Cost installed | vs Montgomery |
|---|---|---|
| Birmingham | $3,272 – $7,480 | +3% |
| Mobile | $3,218 – $7,356 | +2% |
| Huntsville | $3,225 – $7,371 | +2% |
| Tuscaloosa | $3,245 – $7,416 | +3% |
| Alabama average | $3,206 – $7,328 | +1% |
Climate and equipment sizing in Montgomery
Permits in Montgomery
A residential permit for this work typically runs around $350 in Alabama. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Montgomery building department before work begins.
Hiring in Montgomery
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Alabama.
Frequently asked questions
How much does furnace installation cost in Montgomery?
In 2026, furnace installation costs $3,165 to $7,234 in Montgomery. For an average 1,800 sq ft home, the installed total typically lands between $3,165 and $7,234.
Is Montgomery more expensive than the rest of Alabama?
Not meaningfully. Montgomery prices track the Alabama average closely.
Do I need a permit in Montgomery?
Most work of this type and value requires a permit. Budget around $350 in Alabama and allow extra time for review in metro jurisdictions.
How do I compare quotes in Montgomery?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →