Furnace Installation costs $3,352 to $7,661 in Midland in 2026. For an average 1,800 sq ft home, expect $3,352 – $7,661 installed, typically near $5,506. That is about 2% above the Texas average.
Midland furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Midland runs above the Texas average
Construction wages in Midland average $28.07 per hour against $26.54 statewide, so labor-heavy work prices above the Texas norm here.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in Midland
| Project size | Midland range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,862 – $4,256 | $3,059 |
| 1,400 sq ft home | $2,607 – $5,958 | $4,283 |
| 1,800 sq ft home | $3,352 – $7,661 | $5,506 |
| 2,200 sq ft home | $4,096 – $9,363 | $6,730 |
| 2,600 sq ft home | $4,841 – $11,066 | $7,953 |
| 3,000 sq ft home | $5,586 – $12,768 | $9,177 |
Where the money goes
For an average 1,800 sq ft home in Midland at roughly $5,506, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,202 |
| Materials | 46% | $2,533 |
| Site prep & equipment | 8% | $440 |
| Overhead, disposal & finishing | 6% | $330 |
Midland compared with other Texas markets
| Area | Cost installed | vs Midland |
|---|---|---|
| Houston | $3,322 – $7,593 | −1% |
| Dallas | $3,304 – $7,553 | −1% |
| Austin | $3,327 – $7,604 | −1% |
| San Antonio | $3,256 – $7,442 | −3% |
| Texas average | $3,283 – $7,504 | −2% |
Climate and equipment sizing in Midland
Permits in Midland
A residential permit for this work typically runs around $450 in Texas. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Midland building department before work begins.
Hiring in Midland
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Texas.
Frequently asked questions
How much does furnace installation cost in Midland?
In 2026, furnace installation costs $3,352 to $7,661 in Midland. For an average 1,800 sq ft home, the installed total typically lands between $3,352 and $7,661.
Is Midland more expensive than the rest of Texas?
Yes. Midland runs about 2% above the Texas average, because local construction wages ($28.07/hr) sit above the statewide figure of $26.54/hr.
Do I need a permit in Midland?
Most work of this type and value requires a permit. Budget around $450 in Texas and allow extra time for review in metro jurisdictions.
How do I compare quotes in Midland?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →