Furnace Installation costs $3,515 to $8,035 in Evansville in 2026. For an average 1,800 sq ft home, expect $3,515 – $8,035 installed, typically near $5,775. That is essentially in line with the Indiana average.
Evansville furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Evansville compares with the rest of Indiana
Construction wages in Evansville average $31.78 per hour against $31.80 statewide, so pricing tracks the Indiana norm closely.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in Evansville
| Project size | Evansville range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,953 – $4,464 | $3,208 |
| 1,400 sq ft home | $2,734 – $6,250 | $4,492 |
| 1,800 sq ft home | $3,515 – $8,035 | $5,775 |
| 2,200 sq ft home | $4,297 – $9,821 | $7,059 |
| 2,600 sq ft home | $5,078 – $11,606 | $8,342 |
| 3,000 sq ft home | $5,859 – $13,392 | $9,625 |
Where the money goes
For an average 1,800 sq ft home in Evansville at roughly $5,775, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,310 |
| Materials | 46% | $2,657 |
| Site prep & equipment | 8% | $462 |
| Overhead, disposal & finishing | 6% | $347 |
Evansville compared with other Indiana markets
| Area | Cost installed | vs Evansville |
|---|---|---|
| Indianapolis | $3,537 – $8,084 | +1% |
| Fort Wayne | $3,500 – $8,000 | 0% |
| Elkhart | $3,474 – $7,941 | −1% |
| South Bend | $3,511 – $8,025 | 0% |
| Indiana average | $3,517 – $8,038 | 0% |
Climate and equipment sizing in Evansville
Permits in Evansville
A residential permit for this work typically runs around $350 in Indiana. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Evansville building department before work begins.
Hiring in Evansville
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Indiana.
Frequently asked questions
How much does furnace installation cost in Evansville?
In 2026, furnace installation costs $3,515 to $8,035 in Evansville. For an average 1,800 sq ft home, the installed total typically lands between $3,515 and $8,035.
Is Evansville more expensive than the rest of Indiana?
Not meaningfully. Evansville prices track the Indiana average closely.
Do I need a permit in Evansville?
Most work of this type and value requires a permit. Budget around $350 in Indiana and allow extra time for review in metro jurisdictions.
How do I compare quotes in Evansville?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →