Furnace Installation costs $3,574 to $8,168 in Davenport in 2026. For an average 1,800 sq ft home, expect $3,574 – $8,168 installed, typically near $5,871. That is about 4% above the Iowa average.
Davenport furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Davenport runs above the Iowa average
Construction wages in Davenport average $33.07 per hour against $29.84 statewide, so labor-heavy work prices above the Iowa norm here.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in Davenport
| Project size | Davenport range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,985 – $4,538 | $3,262 |
| 1,400 sq ft home | $2,779 – $6,353 | $4,566 |
| 1,800 sq ft home | $3,574 – $8,168 | $5,871 |
| 2,200 sq ft home | $4,368 – $9,984 | $7,176 |
| 2,600 sq ft home | $5,162 – $11,799 | $8,480 |
| 3,000 sq ft home | $5,956 – $13,614 | $9,785 |
Where the money goes
For an average 1,800 sq ft home in Davenport at roughly $5,871, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,348 |
| Materials | 46% | $2,701 |
| Site prep & equipment | 8% | $470 |
| Overhead, disposal & finishing | 6% | $352 |
Davenport compared with other Iowa markets
| Area | Cost installed | vs Davenport |
|---|---|---|
| Des Moines | $3,503 – $8,007 | −2% |
| Cedar Rapids | $3,449 – $7,883 | −3% |
| Waterloo | $3,482 – $7,959 | −3% |
| Sioux City | $3,391 – $7,752 | −5% |
| Iowa average | $3,430 – $7,840 | −4% |
Climate and equipment sizing in Davenport
Permits in Davenport
A residential permit for this work typically runs around $300 in Iowa. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Davenport building department before work begins.
Hiring in Davenport
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Iowa.
Frequently asked questions
How much does furnace installation cost in Davenport?
In 2026, furnace installation costs $3,574 to $8,168 in Davenport. For an average 1,800 sq ft home, the installed total typically lands between $3,574 and $8,168.
Is Davenport more expensive than the rest of Iowa?
Yes. Davenport runs about 4% above the Iowa average, because local construction wages ($33.07/hr) sit above the statewide figure of $29.84/hr.
Do I need a permit in Davenport?
Most work of this type and value requires a permit. Budget around $300 in Iowa and allow extra time for review in metro jurisdictions.
How do I compare quotes in Davenport?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →