Furnace Installation costs $3,562 to $8,142 in Akron in 2026. For an average 1,800 sq ft home, expect $3,562 – $8,142 installed, typically near $5,852. That is essentially in line with the Ohio average.
Akron furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Akron compares with the rest of Ohio
Construction wages in Akron average $32.82 per hour against $31.68 statewide, so pricing tracks the Ohio norm closely.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in Akron
| Project size | Akron range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,979 – $4,523 | $3,251 |
| 1,400 sq ft home | $2,770 – $6,332 | $4,551 |
| 1,800 sq ft home | $3,562 – $8,142 | $5,852 |
| 2,200 sq ft home | $4,354 – $9,951 | $7,152 |
| 2,600 sq ft home | $5,145 – $11,760 | $8,453 |
| 3,000 sq ft home | $5,937 – $13,570 | $9,753 |
Where the money goes
For an average 1,800 sq ft home in Akron at roughly $5,852, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,341 |
| Materials | 46% | $2,692 |
| Site prep & equipment | 8% | $468 |
| Overhead, disposal & finishing | 6% | $351 |
Akron compared with other Ohio markets
| Area | Cost installed | vs Akron |
|---|---|---|
| Columbus | $3,594 – $8,216 | +1% |
| Cincinnati | $3,515 – $8,035 | −1% |
| Cleveland | $3,532 – $8,074 | −1% |
| Toledo | $3,549 – $8,113 | 0% |
| Ohio average | $3,511 – $8,026 | −1% |
Climate and equipment sizing in Akron
Permits in Akron
A residential permit for this work typically runs around $400 in Ohio. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Akron building department before work begins.
Hiring in Akron
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Ohio.
Frequently asked questions
How much does furnace installation cost in Akron?
In 2026, furnace installation costs $3,562 to $8,142 in Akron. For an average 1,800 sq ft home, the installed total typically lands between $3,562 and $8,142.
Is Akron more expensive than the rest of Ohio?
Not meaningfully. Akron prices track the Ohio average closely.
Do I need a permit in Akron?
Most work of this type and value requires a permit. Budget around $400 in Ohio and allow extra time for review in metro jurisdictions.
How do I compare quotes in Akron?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →