Composite Deck costs $43.70 to $92.86 per sq ft in Henderson in 2026. For a 400 sq ft project, expect $17,480 – $37,144 installed, typically near $27,312. That is about 7% above the Nevada state average.
Henderson composite deck calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Henderson costs more than the rest of Nevada
Henderson carries roughly a 7% premium over the Nevada statewide figure. Three things drive that gap. Metro wages run above the state average, and labor is about 42% of this bill. Permitting and inspection are slower and more expensive inside city limits. And site access is tighter, which means smaller equipment, more hand work, and sometimes street permits for deliveries.
Statewide, Nevada averages $40.84 to $86.79 per sq ft, against $43.70 to $92.86 inside Henderson. Suburbs on the metro fringe usually fall between the two.
Composite Deck cost by project size in Henderson
| Project size | Henderson range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $4,370 – $9,287 | $6,828 |
| 12×12 (144 sq ft) | $6,293 – $13,372 | $9,833 |
| 12×16 (192 sq ft) | $8,390 – $17,830 | $13,110 |
| 12×20 (240 sq ft) | $10,488 – $22,287 | $16,388 |
| 16×20 (320 sq ft) | $13,984 – $29,716 | $21,850 |
| 20×20 (400 sq ft) | $17,480 – $37,145 | $27,313 |
Where the money actually goes
For a 400 sq ft project in Henderson at roughly $27,312, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $11,471 |
| Materials | 44% | $11,880 |
| Site prep & equipment | 9% | $2,376 |
| Overhead, disposal & finishing | 6% | $1,584 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting preparation, not a genuine bargain.
Henderson compared with other Nevada markets
| Area | Cost per sq ft | vs Henderson |
|---|---|---|
| Las Vegas | $44.52 – $94.60 | +2% |
| Reno | $44.11 – $93.73 | +1% |
| Nevada average | $40.84 – $86.79 | −7% |
Frost depth and code requirements in Henderson
Permits in Henderson
A residential permit for this work typically runs around $500 in Nevada, and metro jurisdictions like Henderson usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Henderson building department before work begins.
Hiring in Henderson
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same scope and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in Nevada.
Frequently asked questions
How much does composite deck cost in Henderson?
In 2026, composite deck costs $43.70 to $92.86 per sq ft in Henderson. For a 400 sq ft project, the installed total typically lands between $17,480 and $37,144.
Is Henderson more expensive than the rest of Nevada?
Yes. Henderson runs about 7% above the Nevada statewide average, driven by metro wage levels, permitting, and tighter site access.
Do I need a permit in Henderson?
Most work of this type and value requires a permit. Budget around $500 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Henderson?
Insist on three written, itemised quotes covering identical scope, materials, and preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full deck cost calculator →