Composite Deck costs $37.82 to $80.37 per sq ft in Hagerstown in 2026. For a 400 sq ft project, expect $15,129 – $32,149 installed, typically near $23,639. That is about 5% below the Maryland average.
Hagerstown composite deck calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Hagerstown runs below the Maryland average
Construction wages in Hagerstown average $27.37 per hour against $31.34 statewide. Hagerstown sits below the Maryland average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Composite Deck cost by project size in Hagerstown
| Project size | Hagerstown range | Typical |
|---|---|---|
| 100 sq ft | $3,782 – $8,037 | $5,910 |
| 200 sq ft | $7,564 – $16,075 | $11,820 |
| 300 sq ft | $11,347 – $24,112 | $17,729 |
| 400 sq ft | $15,129 – $32,149 | $23,639 |
| 600 sq ft | $22,693 – $48,224 | $35,459 |
| 800 sq ft | $30,258 – $64,298 | $47,278 |
| 1,000 sq ft | $37,822 – $80,373 | $59,098 |
| 1,500 sq ft | $56,734 – $120,559 | $88,646 |
Where the money goes
For a 400 sq ft project in Hagerstown at roughly $23,639, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $9,928 |
| Materials | 44% | $10,401 |
| Site prep & equipment | 8% | $1,891 |
| Overhead, disposal & finishing | 6% | $1,418 |
Hagerstown compared with other Maryland markets
| Area | Cost per sq ft | vs Hagerstown |
|---|---|---|
| Baltimore | $39.50 – $83.93 | +4% |
| Maryland nonmetropolitan area | $37.71 – $80.12 | 0% |
| Lexington Park | $39.10 – $83.08 | +3% |
| Salisbury | $38.88 – $82.61 | +3% |
| Maryland average | $39.95 – $84.89 | +6% |
Ground conditions and code in Hagerstown
Permits in Hagerstown
A residential permit for this work typically runs around $500 in Maryland. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Hagerstown building department before work begins.
Hiring in Hagerstown
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Maryland.
Frequently asked questions
How much does composite deck cost in Hagerstown?
In 2026, composite deck costs $37.82 to $80.37 per sq ft in Hagerstown. For a 400 sq ft project, the installed total typically lands between $15,129 and $32,149.
Is Hagerstown more expensive than the rest of Maryland?
No. Hagerstown actually runs about 5% below the Maryland average. Local construction wages are $27.37/hr against $31.34/hr statewide.
Do I need a permit in Hagerstown?
Most work of this type and value requires a permit. Budget around $500 in Maryland and allow extra time for review in metro jurisdictions.
How do I compare quotes in Hagerstown?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full composite deck calculator →