Composite Deck costs $37.55 to $79.79 per sq ft in Greenville in 2026. For a 400 sq ft project, expect $15,018 – $31,914 installed, typically near $23,466. That is essentially in line with the South Carolina average.
Greenville composite deck calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Greenville compares with the rest of South Carolina
Construction wages in Greenville average $26.82 per hour against $26.64 statewide, so pricing tracks the South Carolina norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Composite Deck cost by project size in Greenville
| Project size | Greenville range | Typical |
|---|---|---|
| 100 sq ft | $3,755 – $7,979 | $5,867 |
| 200 sq ft | $7,509 – $15,957 | $11,733 |
| 300 sq ft | $11,264 – $23,936 | $17,600 |
| 400 sq ft | $15,018 – $31,914 | $23,466 |
| 600 sq ft | $22,528 – $47,871 | $35,199 |
| 800 sq ft | $30,037 – $63,828 | $46,933 |
| 1,000 sq ft | $37,546 – $79,786 | $58,666 |
| 1,500 sq ft | $56,319 – $119,678 | $87,999 |
Where the money goes
For a 400 sq ft project in Greenville at roughly $23,466, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $9,856 |
| Materials | 44% | $10,325 |
| Site prep & equipment | 8% | $1,877 |
| Overhead, disposal & finishing | 6% | $1,408 |
Greenville compared with other South Carolina markets
| Area | Cost per sq ft | vs Greenville |
|---|---|---|
| Charleston | $37.86 – $80.45 | +1% |
| Columbia | $37.38 – $79.42 | 0% |
| Myrtle Beach | $36.53 – $77.64 | −3% |
| Spartanburg | $37.50 – $79.69 | 0% |
| South Carolina average | $37.45 – $79.57 | 0% |
Ground conditions and code in Greenville
Permits in Greenville
A residential permit for this work typically runs around $350 in South Carolina. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Greenville building department before work begins.
Hiring in Greenville
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in South Carolina.
Frequently asked questions
How much does composite deck cost in Greenville?
In 2026, composite deck costs $37.55 to $79.79 per sq ft in Greenville. For a 400 sq ft project, the installed total typically lands between $15,018 and $31,914.
Is Greenville more expensive than the rest of South Carolina?
Not meaningfully. Greenville prices track the South Carolina average closely.
Do I need a permit in Greenville?
Most work of this type and value requires a permit. Budget around $350 in South Carolina and allow extra time for review in metro jurisdictions.
How do I compare quotes in Greenville?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full composite deck calculator →