Wood Fence costs $17.19 to $42.98 per linear ft in Montana in 2026. For a 150-foot run, that puts the installed total at $2,579 – $6,446, with most projects landing near $4,512. Montana is about 4% below the national average.
Why Montana prices differ from the national average
Roughly 50% of the installed cost of wood fence is labor, and labor is the part of the bill that actually moves between states. Montana construction wages average $33.64 per hour against a national figure near $36.97 — a wage index of 0.91×.
Materials behave differently. Fence panels, posts, rails, and hardware are priced by national manufacturers and distributors, so material costs barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Montana at $17.19 to $42.98 per linear ft, against a national baseline of $18.00 to $45.00.
Two other forces sit on top of that. Metro areas inside Montana price above the statewide figure because of wages, permitting, and site access. And the state’s deep frost line adds excavation and below-grade volume that southern states never pay for.
Wood Fence cost by project size in Montana
These figures apply the Montana rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Montana cost range | Typical |
|---|---|---|
| 50 ft | $860 – $2,149 | $1,504 |
| 100 ft | $1,719 – $4,298 | $3,008 |
| 150 ft | $2,579 – $6,446 | $4,512 |
| 200 ft | $3,438 – $8,595 | $6,017 |
| 250 ft | $4,298 – $10,744 | $7,521 |
| 300 ft | $5,157 – $12,893 | $9,025 |
| 400 ft | $6,876 – $17,190 | $12,033 |
| 500 ft | $8,595 – $21,488 | $15,041 |
Where the money actually goes
For a 150-foot run in Montana at roughly $4,512, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,256 |
| Materials | 38% | $1,692 |
| Site prep & equipment | 8% | $338 |
| Overhead, disposal & finishing | 5% | $226 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Wood Fence cost by city in Montana
Statewide averages hide a lot. Billings, Missoula, Bozeman all price above the Montana average, while rural counties run below it:
| Area | Cost per linear ft | A 150-foot run | vs state |
|---|---|---|---|
| Billings | $17.88 – $44.69 | $4,693 | +4% |
| Missoula | $18.22 – $45.55 | $4,783 | +6% |
| Bozeman | $19.25 – $48.13 | $5,054 | +12% |
| Rural Montana | $15.99 – $39.97 | $4,197 | −7% |
What is included in a Montana quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $350 in Montana), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Montana
Permits in Montana
A residential permit for work of this type and value in Montana typically runs around $350, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-linear ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Montana
Weather closes the working window in Montana. Concrete and exterior work generally run from late spring through early autumn, and crews book out well before then. Cold-weather work is possible with blankets, heated enclosures, or accelerating admixtures, but those add cost. Booking in late winter for spring work usually secures better pricing than calling in June.
DIY versus hiring a contractor in Montana
Materials account for roughly 50% of the installed price, so a 150-foot run carries about $2,256 in materials against an installed cost near $4,512. The gap is labor, equipment, and the risk of getting it wrong.
Because Montana labor runs at 0.91× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Montana compares with nearby states
Montana sits in the West region. Here is how neighbouring states price the same specification:
| State | Cost per linear ft | vs Montana |
|---|---|---|
| Idaho | $17.10 – $42.75 | Lower than Montana |
| New Mexico | $17.10 – $42.75 | Lower than Montana |
| Wyoming | $17.73 – $44.33 | Higher than Montana |
| Utah | $17.82 – $44.55 | Higher than Montana |
| Arizona | $17.91 – $44.78 | Higher than Montana |
| Nevada | $18.45 – $46.12 | Higher than Montana |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Montana rates already applied:
Open the wood fence calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does wood fence cost in Montana?
In 2026, wood fence costs $17.19 to $42.98 per linear ft in Montana. For a 150-foot run, the installed total typically lands between $2,579 and $6,446, with most projects near $4,512.
Is wood fence more expensive in Montana than the national average?
Montana is about 4% below the national average. The driver is a construction wage index of 0.91 times the national figure, applied to the roughly 50% of the project cost that is labor.
Which parts of Montana are most expensive?
Billings, Missoula, and Bozeman price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Montana?
Most municipalities in Montana require a permit for work of this type and value. Budget around $350 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Montana?
The frost line in Montana is roughly 48 inches. Footings and posts must extend below that depth to avoid frost heave, which adds excavation and material to the job.
When is the cheapest time to book this work in Montana?
Weather closes the working window in Montana. Concrete and exterior work generally run from late spring through early autumn, and crews book out well before then. Cold-weather work is possible with blankets, heated enclosures, or accelerating admixtures, but those add cost. Booking in late winter for spring work usually secures better pricing than calling in June.
How much of the cost is labor versus materials?
Labor is about 50% of the installed price and materials about 50%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Montana vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.