Wood Fence costs $17.64 to $44.10 per linear ft in Florida in 2026. For a 150-foot run, that puts the installed total at $2,646 – $6,615, with most projects landing near $4,631. Florida is about 2% below the national average.
Why Florida prices differ from the national average
Roughly 50% of the installed cost of wood fence is labor, and labor is the part of the bill that actually moves between states. Florida construction wages average $35.49 per hour against a national figure near $36.97 — a wage index of 0.96×.
Materials behave differently. Fence panels, posts, rails, and hardware are priced by national manufacturers and distributors, so material costs barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Florida at $17.64 to $44.10 per linear ft, against a national baseline of $18.00 to $45.00.
Two other forces sit on top of that. Metro areas inside Florida price above the statewide figure because of wages, permitting, and site access. And the absence of a frost line removes a cost that northern states cannot avoid.
Wood Fence cost by project size in Florida
These figures apply the Florida rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Florida cost range | Typical |
|---|---|---|
| 50 ft | $882 – $2,205 | $1,544 |
| 100 ft | $1,764 – $4,410 | $3,087 |
| 150 ft | $2,646 – $6,615 | $4,631 |
| 200 ft | $3,528 – $8,820 | $6,174 |
| 250 ft | $4,410 – $11,025 | $7,718 |
| 300 ft | $5,292 – $13,230 | $9,261 |
| 400 ft | $7,056 – $17,640 | $12,348 |
| 500 ft | $8,820 – $22,050 | $15,435 |
Where the money actually goes
For a 150-foot run in Florida at roughly $4,631, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,315 |
| Materials | 38% | $1,736 |
| Site prep & equipment | 8% | $347 |
| Overhead, disposal & finishing | 5% | $232 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Wood Fence cost by city in Florida
Statewide averages hide a lot. Miami, Orlando, Tampa all price above the Florida average, while rural counties run below it:
| Area | Cost per linear ft | A 150-foot run | vs state |
|---|---|---|---|
| Miami | $20.46 – $51.16 | $5,371 | +16% |
| Orlando | $18.87 – $47.19 | $4,955 | +7% |
| Tampa | $18.70 – $46.75 | $4,908 | +6% |
| Rural Florida | $16.41 – $41.01 | $4,306 | −7% |
What is included in a Florida quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $500 in Florida), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Florida
Permits in Florida
A residential permit for work of this type and value in Florida typically runs around $500, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-linear ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Florida
Florida allows year-round work, so there is no hard seasonal shutdown. The practical constraints are summer heat, which can force early-morning pours and rain delays in the wet season. Late autumn and winter are often the quietest and cheapest times to book a crew.
DIY versus hiring a contractor in Florida
Materials account for roughly 50% of the installed price, so a 150-foot run carries about $2,315 in materials against an installed cost near $4,631. The gap is labor, equipment, and the risk of getting it wrong.
Because Florida labor runs at 0.96× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Florida compares with nearby states
Florida sits in the South region. Here is how neighbouring states price the same specification:
| State | Cost per linear ft | vs Florida |
|---|---|---|
| Mississippi | $16.38 – $40.95 | Lower than Florida |
| Arkansas | $16.47 – $41.18 | Lower than Florida |
| Alabama | $16.56 – $41.40 | Lower than Florida |
| West Virginia | $16.74 – $41.85 | Lower than Florida |
| Oklahoma | $16.83 – $42.08 | Lower than Florida |
| Kentucky | $16.92 – $42.30 | Lower than Florida |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Florida rates already applied:
Open the wood fence calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does wood fence cost in Florida?
In 2026, wood fence costs $17.64 to $44.10 per linear ft in Florida. For a 150-foot run, the installed total typically lands between $2,646 and $6,615, with most projects near $4,631.
Is wood fence more expensive in Florida than the national average?
Florida is about 2% below the national average. The driver is a construction wage index of 0.96 times the national figure, applied to the roughly 50% of the project cost that is labor.
Which parts of Florida are most expensive?
Miami, Orlando, and Tampa price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Florida?
Most municipalities in Florida require a permit for work of this type and value. Budget around $500 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Florida?
Florida is effectively frost-free, so there is no frost-depth footing requirement across most of the state.
When is the cheapest time to book this work in Florida?
Florida allows year-round work, so there is no hard seasonal shutdown. The practical constraints are summer heat, which can force early-morning pours and rain delays in the wet season. Late autumn and winter are often the quietest and cheapest times to book a crew.
How much of the cost is labor versus materials?
Labor is about 50% of the installed price and materials about 50%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Florida vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.