Vinyl Fence costs $27.09 to $58.05 per linear ft in Sioux City in 2026. For a 150-foot run, expect $4,063 – $8,707 installed, typically near $6,385. That is essentially in line with the Iowa average.
Sioux City vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Sioux City compares with the rest of Iowa
Construction wages in Sioux City average $28.98 per hour against $29.84 statewide, so pricing tracks the Iowa norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Sioux City
| Project size | Sioux City range | Typical |
|---|---|---|
| 50 ft | $1,354 – $2,902 | $2,128 |
| 100 ft | $2,709 – $5,805 | $4,257 |
| 150 ft | $4,063 – $8,707 | $6,385 |
| 200 ft | $5,418 – $11,609 | $8,513 |
| 250 ft | $6,772 – $14,511 | $10,642 |
| 300 ft | $8,126 – $17,414 | $12,770 |
| 400 ft | $10,835 – $23,218 | $17,027 |
| 500 ft | $13,544 – $29,023 | $21,283 |
Where the money goes
For a 150-foot run in Sioux City at roughly $6,385, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,682 |
| Materials | 44% | $2,809 |
| Site prep & equipment | 8% | $511 |
| Overhead, disposal & finishing | 6% | $383 |
Sioux City compared with other Iowa markets
| Area | Cost per linear ft | vs Sioux City |
|---|---|---|
| Des Moines | $28.03 – $60.06 | +3% |
| Davenport | $28.62 – $61.33 | +6% |
| Cedar Rapids | $27.57 – $59.08 | +2% |
| Waterloo | $27.85 – $59.67 | +3% |
| Iowa average | $27.41 – $58.74 | +1% |
Ground conditions and code in Sioux City
Permits in Sioux City
A residential permit for this work typically runs around $300 in Iowa. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Sioux City building department before work begins.
Hiring in Sioux City
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Iowa.
Frequently asked questions
How much does vinyl fence cost in Sioux City?
In 2026, vinyl fence costs $27.09 to $58.05 per linear ft in Sioux City. For a 150-foot run, the installed total typically lands between $4,063 and $8,707.
Is Sioux City more expensive than the rest of Iowa?
Not meaningfully. Sioux City prices track the Iowa average closely.
Do I need a permit in Sioux City?
Most work of this type and value requires a permit. Budget around $300 in Iowa and allow extra time for review in metro jurisdictions.
How do I compare quotes in Sioux City?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →