Vinyl Fence costs $26.28 to $56.32 per linear ft in Greenville in 2026. For a 150-foot run, expect $3,942 – $8,448 installed, typically near $6,195. That is essentially in line with the South Carolina average.
Greenville vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Greenville compares with the rest of South Carolina
Construction wages in Greenville average $26.82 per hour against $26.64 statewide, so pricing tracks the South Carolina norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Greenville
| Project size | Greenville range | Typical |
|---|---|---|
| 50 ft | $1,314 – $2,816 | $2,065 |
| 100 ft | $2,628 – $5,632 | $4,130 |
| 150 ft | $3,942 – $8,448 | $6,195 |
| 200 ft | $5,256 – $11,264 | $8,260 |
| 250 ft | $6,571 – $14,080 | $10,325 |
| 300 ft | $7,885 – $16,896 | $12,390 |
| 400 ft | $10,513 – $22,528 | $16,520 |
| 500 ft | $13,141 – $28,160 | $20,650 |
Where the money goes
For a 150-foot run in Greenville at roughly $6,195, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,602 |
| Materials | 44% | $2,726 |
| Site prep & equipment | 8% | $496 |
| Overhead, disposal & finishing | 6% | $372 |
Greenville compared with other South Carolina markets
| Area | Cost per linear ft | vs Greenville |
|---|---|---|
| Charleston | $26.50 – $56.79 | +1% |
| Columbia | $26.16 – $56.06 | 0% |
| Myrtle Beach | $25.57 – $54.80 | −3% |
| Spartanburg | $26.25 – $56.26 | 0% |
| South Carolina average | $26.21 – $56.17 | 0% |
Ground conditions and code in Greenville
Permits in Greenville
A residential permit for this work typically runs around $350 in South Carolina. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Greenville building department before work begins.
Hiring in Greenville
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in South Carolina.
Frequently asked questions
How much does vinyl fence cost in Greenville?
In 2026, vinyl fence costs $26.28 to $56.32 per linear ft in Greenville. For a 150-foot run, the installed total typically lands between $3,942 and $8,448.
Is Greenville more expensive than the rest of South Carolina?
Not meaningfully. Greenville prices track the South Carolina average closely.
Do I need a permit in Greenville?
Most work of this type and value requires a permit. Budget around $350 in South Carolina and allow extra time for review in metro jurisdictions.
How do I compare quotes in Greenville?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →