Vinyl Fence costs $27.85 to $59.67 per linear ft in Burlington in 2026. For a 150-foot run, expect $4,177 – $8,951 installed, typically near $6,564. That is about 2% above the Vermont average.
Burlington vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Burlington runs above the Vermont average
Construction wages in Burlington average $31.01 per hour against $29.82 statewide, so labor-heavy work prices above the Vermont norm here.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Burlington
| Project size | Burlington range | Typical |
|---|---|---|
| 50 ft | $1,392 – $2,984 | $2,188 |
| 100 ft | $2,785 – $5,967 | $4,376 |
| 150 ft | $4,177 – $8,951 | $6,564 |
| 200 ft | $5,569 – $11,934 | $8,752 |
| 250 ft | $6,962 – $14,918 | $10,940 |
| 300 ft | $8,354 – $17,901 | $13,128 |
| 400 ft | $11,139 – $23,869 | $17,504 |
| 500 ft | $13,923 – $29,836 | $21,880 |
Where the money goes
For a 150-foot run in Burlington at roughly $6,564, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,757 |
| Materials | 44% | $2,888 |
| Site prep & equipment | 8% | $525 |
| Overhead, disposal & finishing | 6% | $394 |
Burlington compared with other Vermont markets
| Area | Cost per linear ft | vs Burlington |
|---|---|---|
| Northern Vermont nonmetropolitan area | $27.17 – $58.21 | −2% |
| Southern Vermont nonmetropolitan area | $27.22 – $58.33 | −2% |
| Vermont average | $27.40 – $58.71 | −2% |
Ground conditions and code in Burlington
Permits in Burlington
A residential permit for this work typically runs around $400 in Vermont. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Burlington building department before work begins.
Hiring in Burlington
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Vermont.
Frequently asked questions
How much does vinyl fence cost in Burlington?
In 2026, vinyl fence costs $27.85 to $59.67 per linear ft in Burlington. For a 150-foot run, the installed total typically lands between $4,177 and $8,951.
Is Burlington more expensive than the rest of Vermont?
Yes. Burlington runs about 2% above the Vermont average, because local construction wages ($31.01/hr) sit above the statewide figure of $29.82/hr.
Do I need a permit in Burlington?
Most work of this type and value requires a permit. Budget around $400 in Vermont and allow extra time for review in metro jurisdictions.
How do I compare quotes in Burlington?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →