Vinyl Fence costs $26.21 to $56.17 per linear ft in Albuquerque in 2026. For a 150-foot run, expect $3,932 – $8,426 installed, typically near $6,179. That is essentially in line with the New Mexico average.
Albuquerque vinyl fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Albuquerque compares with the rest of New Mexico
Construction wages in Albuquerque average $26.63 per hour against $27.04 statewide, so pricing tracks the New Mexico norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Vinyl Fence cost by project size in Albuquerque
| Project size | Albuquerque range | Typical |
|---|---|---|
| 50 ft | $1,311 – $2,809 | $2,060 |
| 100 ft | $2,621 – $5,617 | $4,119 |
| 150 ft | $3,932 – $8,426 | $6,179 |
| 200 ft | $5,243 – $11,234 | $8,239 |
| 250 ft | $6,553 – $14,043 | $10,298 |
| 300 ft | $7,864 – $16,852 | $12,358 |
| 400 ft | $10,485 – $22,469 | $16,477 |
| 500 ft | $13,107 – $28,086 | $20,596 |
Where the money goes
For a 150-foot run in Albuquerque at roughly $6,179, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,595 |
| Materials | 44% | $2,719 |
| Site prep & equipment | 8% | $494 |
| Overhead, disposal & finishing | 6% | $371 |
Albuquerque compared with other New Mexico markets
| Area | Cost per linear ft | vs Albuquerque |
|---|---|---|
| Eastern New Mexico nonmetropolitan area | $26.47 – $56.71 | +1% |
| Farmington | $26.60 – $57.00 | +1% |
| Las Cruces | $25.43 – $54.50 | −3% |
| Northern New Mexico nonmetropolitan area | $26.28 – $56.32 | 0% |
| New Mexico average | $26.37 – $56.50 | +1% |
Ground conditions and code in Albuquerque
Permits in Albuquerque
A residential permit for this work typically runs around $350 in New Mexico. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Albuquerque building department before work begins.
Hiring in Albuquerque
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in New Mexico.
Frequently asked questions
How much does vinyl fence cost in Albuquerque?
In 2026, vinyl fence costs $26.21 to $56.17 per linear ft in Albuquerque. For a 150-foot run, the installed total typically lands between $3,932 and $8,426.
Is Albuquerque more expensive than the rest of New Mexico?
Not meaningfully. Albuquerque prices track the New Mexico average closely.
Do I need a permit in Albuquerque?
Most work of this type and value requires a permit. Budget around $350 in New Mexico and allow extra time for review in metro jurisdictions.
How do I compare quotes in Albuquerque?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full vinyl fence calculator →