Stamped Concrete costs $11.97 to $25.78 per sq ft in Tulsa in 2026. For a 400 sq ft project, expect $4,788 – $10,312 installed, typically near $7,550. That is essentially in line with the Oklahoma average.
Tulsa stamped concrete calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Tulsa compares with the rest of Oklahoma
Construction wages in Tulsa average $27.14 per hour against $26.50 statewide, so pricing tracks the Oklahoma norm closely.
Labor is about 58% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Stamped Concrete cost by project size in Tulsa
| Project size | Tulsa range | Typical |
|---|---|---|
| 100 sq ft | $1,197 – $2,578 | $1,887 |
| 200 sq ft | $2,394 – $5,156 | $3,775 |
| 300 sq ft | $3,591 – $7,734 | $5,662 |
| 400 sq ft | $4,788 – $10,312 | $7,550 |
| 600 sq ft | $7,181 – $15,467 | $11,324 |
| 800 sq ft | $9,575 – $20,623 | $15,099 |
| 1,000 sq ft | $11,969 – $25,779 | $18,874 |
| 1,500 sq ft | $17,953 – $38,668 | $28,311 |
Where the money goes
For a 400 sq ft project in Tulsa at roughly $7,550, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 58% | $4,379 |
| Materials | 28% | $2,114 |
| Site prep & equipment | 8% | $604 |
| Overhead, disposal & finishing | 6% | $453 |
Tulsa compared with other Oklahoma markets
| Area | Cost per sq ft | vs Tulsa |
|---|---|---|
| Oklahoma City | $12.00 – $25.85 | 0% |
| Lawton | $11.42 – $24.60 | −5% |
| Enid | $11.50 – $24.77 | −4% |
| Oklahoma average | $11.82 – $25.45 | −1% |
Ground conditions and code in Tulsa
Permits in Tulsa
A residential permit for this work typically runs around $300 in Oklahoma. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Tulsa building department before work begins.
Hiring in Tulsa
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Oklahoma.
Frequently asked questions
How much does stamped concrete cost in Tulsa?
In 2026, stamped concrete costs $11.97 to $25.78 per sq ft in Tulsa. For a 400 sq ft project, the installed total typically lands between $4,788 and $10,312.
Is Tulsa more expensive than the rest of Oklahoma?
Not meaningfully. Tulsa prices track the Oklahoma average closely.
Do I need a permit in Tulsa?
Most work of this type and value requires a permit. Budget around $300 in Oklahoma and allow extra time for review in metro jurisdictions.
How do I compare quotes in Tulsa?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full stamped concrete calculator →