Stamped Concrete Cost in Jacksonville, FL (2026)

HomeConcreteFlorida › Jacksonville
Stamped Concrete Cost in Jacksonville, FL (2026)
BLS OEWS 2025 wage data · updated August 2026
Jacksonville · per sq ft
$11.89 – $25.61

Stamped Concrete costs $11.89 to $25.61 per sq ft in Jacksonville in 2026. For a 400 sq ft project, expect $4,755 – $10,242 installed, typically near $7,499. That is essentially in line with the Florida average.

Typical sq ft
$18.75
vs state average
In line
Local construction wage
$26.78
Frost depth
None

Jacksonville stamped concrete calculator

Estimated installed cost

Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.

How Jacksonville compares with the rest of Florida

Construction wages in Jacksonville average $26.78 per hour against $26.71 statewide, so pricing tracks the Florida norm closely.

Labor is about 58% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.

Stamped Concrete cost by project size in Jacksonville

Project sizeJacksonville rangeTypical
100 sq ft$1,189 – $2,561$1,875
200 sq ft$2,378 – $5,121$3,749
300 sq ft$3,566 – $7,682$5,624
400 sq ft$4,755 – $10,242$7,499
600 sq ft$7,133 – $15,363$11,248
800 sq ft$9,511 – $20,484$14,997
1,000 sq ft$11,888 – $25,605$18,747
1,500 sq ft$17,832 – $38,408$28,120

Where the money goes

For a 400 sq ft project in Jacksonville at roughly $7,499, a typical bill splits like this:

Line itemShareCost
Labor58%$4,349
Materials28%$2,100
Site prep & equipment8%$600
Overhead, disposal & finishing6%$450

Jacksonville compared with other Florida markets

AreaCost per sq ftvs Jacksonville
Miami$12.16 – $26.20+2%
Tampa$11.86 – $25.550%
Orlando$11.79 – $25.38−1%
Cape Coral$11.67 – $25.14−2%
Florida average$11.87 – $25.560%

Ground conditions and code in Jacksonville

Jacksonville sits in IECC zone 1-2 (hot) with effectively no frost line, so there is no frost-depth footing requirement. Local codes focus instead on soil bearing, drainage and wind loading.

Permits in Jacksonville

A residential permit for this work typically runs around $500 in Florida. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Jacksonville building department before work begins.

Hiring in Jacksonville

Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Florida.

Frequently asked questions

How much does stamped concrete cost in Jacksonville?

In 2026, stamped concrete costs $11.89 to $25.61 per sq ft in Jacksonville. For a 400 sq ft project, the installed total typically lands between $4,755 and $10,242.

Is Jacksonville more expensive than the rest of Florida?

Not meaningfully. Jacksonville prices track the Florida average closely.

Do I need a permit in Jacksonville?

Most work of this type and value requires a permit. Budget around $500 in Florida and allow extra time for review in metro jurisdictions.

How do I compare quotes in Jacksonville?

Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.

Nearby markets

Open the full stamped concrete calculator →

Methodology. Local pricing applies the Jacksonville construction wage from the BLS Occupational Employment and Wage Statistics (2025 release, $26.78/hr) to the labor share of a national 2026 cost baseline. Materials are held at national prices. Figures refresh automatically with each BLS release. Planning estimates, not quotes. See our full methodology.

Leave a Comment