Mini Split costs $2,831 to $8,493 in Memphis in 2026. For an average 1,800 sq ft home, expect $2,831 – $8,493 installed, typically near $5,662. That is essentially in line with the Tennessee average.
Memphis mini split calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Memphis compares with the rest of Tennessee
Construction wages in Memphis average $27.21 per hour against $27.17 statewide, so pricing tracks the Tennessee norm closely.
Labor is about 42% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Mini Split cost by project size in Memphis
| Project size | Memphis range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,573 – $4,718 | $3,146 |
| 1,400 sq ft home | $2,202 – $6,606 | $4,404 |
| 1,800 sq ft home | $2,831 – $8,493 | $5,662 |
| 2,200 sq ft home | $3,460 – $10,380 | $6,920 |
| 2,600 sq ft home | $4,089 – $12,268 | $8,178 |
| 3,000 sq ft home | $4,718 – $14,155 | $9,437 |
Where the money goes
For an average 1,800 sq ft home in Memphis at roughly $5,662, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 42% | $2,378 |
| Materials | 44% | $2,491 |
| Site prep & equipment | 8% | $453 |
| Overhead, disposal & finishing | 6% | $340 |
Memphis compared with other Tennessee markets
| Area | Cost installed | vs Memphis |
|---|---|---|
| Nashville | $2,885 – $8,656 | +2% |
| Knoxville | $2,812 – $8,437 | −1% |
| Chattanooga | $2,841 – $8,522 | 0% |
| Kingsport | $2,790 – $8,369 | −1% |
| Tennessee average | $2,830 – $8,490 | 0% |
Climate and equipment sizing in Memphis
Permits in Memphis
A residential permit for this work typically runs around $350 in Tennessee. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Memphis building department before work begins.
Hiring in Memphis
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Tennessee.
Frequently asked questions
How much does mini split cost in Memphis?
In 2026, mini split costs $2,831 to $8,493 in Memphis. For an average 1,800 sq ft home, the installed total typically lands between $2,831 and $8,493.
Is Memphis more expensive than the rest of Tennessee?
Not meaningfully. Memphis prices track the Tennessee average closely.
Do I need a permit in Memphis?
Most work of this type and value requires a permit. Budget around $350 in Tennessee and allow extra time for review in metro jurisdictions.
How do I compare quotes in Memphis?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full mini split calculator →