Metal Roof costs $8.15 to $19.92 per sq ft in Twin Falls in 2026. For a 400 sq ft project, expect $3,260 – $7,968 installed, typically near $5,614. That is about 5% below the Idaho average.
Twin Falls metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Twin Falls runs below the Idaho average
Construction wages in Twin Falls average $25.49 per hour against $28.31 statewide. Twin Falls sits below the Idaho average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Twin Falls
| Project size | Twin Falls range | Typical |
|---|---|---|
| 100 sq ft | $815 – $1,992 | $1,403 |
| 200 sq ft | $1,630 – $3,984 | $2,807 |
| 300 sq ft | $2,445 – $5,976 | $4,210 |
| 400 sq ft | $3,260 – $7,968 | $5,614 |
| 600 sq ft | $4,889 – $11,952 | $8,421 |
| 800 sq ft | $6,519 – $15,936 | $11,228 |
| 1,000 sq ft | $8,149 – $19,920 | $14,034 |
| 1,500 sq ft | $12,224 – $29,880 | $21,052 |
Where the money goes
For a 400 sq ft project in Twin Falls at roughly $5,614, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,807 |
| Materials | 36% | $2,021 |
| Site prep & equipment | 8% | $449 |
| Overhead, disposal & finishing | 6% | $337 |
Twin Falls compared with other Idaho markets
| Area | Cost per sq ft | vs Twin Falls |
|---|---|---|
| Boise | $8.60 – $21.01 | +5% |
| Idaho Falls | $8.73 – $21.34 | +7% |
| Coeur d’Alene | $8.69 – $21.24 | +7% |
| Pocatello | $8.41 – $20.55 | +3% |
| Idaho average | $8.55 – $20.91 | +5% |
Ground conditions and code in Twin Falls
Permits in Twin Falls
A residential permit for this work typically runs around $400 in Idaho. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Twin Falls building department before work begins.
Hiring in Twin Falls
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Idaho.
Frequently asked questions
How much does metal roof cost in Twin Falls?
In 2026, metal roof costs $8.15 to $19.92 per sq ft in Twin Falls. For a 400 sq ft project, the installed total typically lands between $3,260 and $7,968.
Is Twin Falls more expensive than the rest of Idaho?
No. Twin Falls actually runs about 5% below the Idaho average. Local construction wages are $25.49/hr against $28.31/hr statewide.
Do I need a permit in Twin Falls?
Most work of this type and value requires a permit. Budget around $400 in Idaho and allow extra time for review in metro jurisdictions.
How do I compare quotes in Twin Falls?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →