Metal Roof costs $8.40 to $20.54 per sq ft in Sioux Falls in 2026. For a 400 sq ft project, expect $3,361 – $8,215 installed, typically near $5,788. That is essentially in line with the South Dakota average.
Sioux Falls metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Sioux Falls compares with the rest of South Dakota
Construction wages in Sioux Falls average $27.23 per hour against $26.41 statewide, so pricing tracks the South Dakota norm closely.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Sioux Falls
| Project size | Sioux Falls range | Typical |
|---|---|---|
| 100 sq ft | $840 – $2,054 | $1,447 |
| 200 sq ft | $1,680 – $4,108 | $2,894 |
| 300 sq ft | $2,521 – $6,161 | $4,341 |
| 400 sq ft | $3,361 – $8,215 | $5,788 |
| 600 sq ft | $5,041 – $12,323 | $8,682 |
| 800 sq ft | $6,721 – $16,430 | $11,576 |
| 1,000 sq ft | $8,402 – $20,538 | $14,470 |
| 1,500 sq ft | $12,603 – $30,807 | $21,705 |
Where the money goes
For a 400 sq ft project in Sioux Falls at roughly $5,788, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,894 |
| Materials | 36% | $2,084 |
| Site prep & equipment | 8% | $463 |
| Overhead, disposal & finishing | 6% | $347 |
Sioux Falls compared with other South Dakota markets
| Area | Cost per sq ft | vs Sioux Falls |
|---|---|---|
| East South Dakota nonmetropolitan area | $8.21 – $20.08 | −2% |
| Rapid City | $8.28 – $20.24 | −1% |
| West South Dakota nonmetropolitan area | $8.11 – $19.82 | −4% |
| South Dakota average | $8.28 – $20.25 | −1% |
Ground conditions and code in Sioux Falls
Permits in Sioux Falls
A residential permit for this work typically runs around $250 in South Dakota. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Sioux Falls building department before work begins.
Hiring in Sioux Falls
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in South Dakota.
Frequently asked questions
How much does metal roof cost in Sioux Falls?
In 2026, metal roof costs $8.40 to $20.54 per sq ft in Sioux Falls. For a 400 sq ft project, the installed total typically lands between $3,361 and $8,215.
Is Sioux Falls more expensive than the rest of South Dakota?
Not meaningfully. Sioux Falls prices track the South Dakota average closely.
Do I need a permit in Sioux Falls?
Most work of this type and value requires a permit. Budget around $250 in South Dakota and allow extra time for review in metro jurisdictions.
How do I compare quotes in Sioux Falls?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →