Metal Roof costs $9.48 to $23.18 per sq ft in Providence in 2026. For a 400 sq ft project, expect $3,793 – $9,272 installed, typically near $6,533. That is about 2% above the Rhode Island average.
Providence metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Providence runs above the Rhode Island average
Construction wages in Providence average $34.77 per hour against $33.67 statewide, so labor-heavy work prices above the Rhode Island norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Providence
| Project size | Providence range | Typical |
|---|---|---|
| 100 sq ft | $948 – $2,318 | $1,633 |
| 200 sq ft | $1,897 – $4,636 | $3,266 |
| 300 sq ft | $2,845 – $6,954 | $4,900 |
| 400 sq ft | $3,793 – $9,272 | $6,533 |
| 600 sq ft | $5,690 – $13,909 | $9,799 |
| 800 sq ft | $7,587 – $18,545 | $13,066 |
| 1,000 sq ft | $9,483 – $23,181 | $16,332 |
| 1,500 sq ft | $14,225 – $34,772 | $24,498 |
Where the money goes
For a 400 sq ft project in Providence at roughly $6,533, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,266 |
| Materials | 36% | $2,352 |
| Site prep & equipment | 8% | $523 |
| Overhead, disposal & finishing | 6% | $392 |
Providence compared with other Rhode Island markets
| Area | Cost per sq ft | vs Providence |
|---|---|---|
| Rhode Island average | $9.32 – $22.79 | −2% |
Ground conditions and code in Providence
Permits in Providence
A residential permit for this work typically runs around $500 in Rhode Island. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Providence building department before work begins.
Hiring in Providence
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Rhode Island.
Frequently asked questions
How much does metal roof cost in Providence?
In 2026, metal roof costs $9.48 to $23.18 per sq ft in Providence. For a 400 sq ft project, the installed total typically lands between $3,793 and $9,272.
Is Providence more expensive than the rest of Rhode Island?
Yes. Providence runs about 2% above the Rhode Island average, because local construction wages ($34.77/hr) sit above the statewide figure of $33.67/hr.
Do I need a permit in Providence?
Most work of this type and value requires a permit. Budget around $500 in Rhode Island and allow extra time for review in metro jurisdictions.
How do I compare quotes in Providence?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →