Metal Roof costs $8.50 to $20.78 per sq ft in Miami in 2026. For a 400 sq ft project, expect $3,400 – $8,312 installed, typically near $5,856. That is about 2% above the Florida average.
Miami metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Miami runs above the Florida average
Construction wages in Miami average $27.95 per hour against $26.71 statewide, so labor-heavy work prices above the Florida norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Miami
| Project size | Miami range | Typical |
|---|---|---|
| 100 sq ft | $850 – $2,078 | $1,464 |
| 200 sq ft | $1,700 – $4,156 | $2,928 |
| 300 sq ft | $2,550 – $6,234 | $4,392 |
| 400 sq ft | $3,400 – $8,312 | $5,856 |
| 600 sq ft | $5,101 – $12,468 | $8,784 |
| 800 sq ft | $6,801 – $16,624 | $11,712 |
| 1,000 sq ft | $8,501 – $20,780 | $14,641 |
| 1,500 sq ft | $12,751 – $31,170 | $21,961 |
Where the money goes
For a 400 sq ft project in Miami at roughly $5,856, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,928 |
| Materials | 36% | $2,108 |
| Site prep & equipment | 8% | $468 |
| Overhead, disposal & finishing | 6% | $351 |
Miami compared with other Florida markets
| Area | Cost per sq ft | vs Miami |
|---|---|---|
| Tampa | $8.32 – $20.34 | −2% |
| Orlando | $8.28 – $20.23 | −3% |
| Jacksonville | $8.34 – $20.38 | −2% |
| Cape Coral | $8.21 – $20.06 | −3% |
| Florida average | $8.33 – $20.35 | −2% |
Ground conditions and code in Miami
Permits in Miami
A residential permit for this work typically runs around $500 in Florida. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Miami building department before work begins.
Hiring in Miami
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Florida.
Frequently asked questions
How much does metal roof cost in Miami?
In 2026, metal roof costs $8.50 to $20.78 per sq ft in Miami. For a 400 sq ft project, the installed total typically lands between $3,400 and $8,312.
Is Miami more expensive than the rest of Florida?
Yes. Miami runs about 2% above the Florida average, because local construction wages ($27.95/hr) sit above the statewide figure of $26.71/hr.
Do I need a permit in Miami?
Most work of this type and value requires a permit. Budget around $500 in Florida and allow extra time for review in metro jurisdictions.
How do I compare quotes in Miami?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →