Metal Roof costs $9.32 to $22.78 per sq ft in Bend in 2026. For a 400 sq ft project, expect $3,728 – $9,113 installed, typically near $6,420. That is about 4% below the Oregon average.
Bend metal roof calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Bend runs below the Oregon average
Construction wages in Bend average $33.64 per hour against $36.54 statewide. Bend sits below the Oregon average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Metal Roof cost by project size in Bend
| Project size | Bend range | Typical |
|---|---|---|
| 100 sq ft | $932 – $2,278 | $1,605 |
| 200 sq ft | $1,864 – $4,556 | $3,210 |
| 300 sq ft | $2,796 – $6,835 | $4,815 |
| 400 sq ft | $3,728 – $9,113 | $6,420 |
| 600 sq ft | $5,592 – $13,669 | $9,631 |
| 800 sq ft | $7,456 – $18,226 | $12,841 |
| 1,000 sq ft | $9,320 – $22,782 | $16,051 |
| 1,500 sq ft | $13,980 – $34,174 | $24,077 |
Where the money goes
For a 400 sq ft project in Bend at roughly $6,420, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $3,210 |
| Materials | 36% | $2,311 |
| Site prep & equipment | 8% | $514 |
| Overhead, disposal & finishing | 6% | $385 |
Bend compared with other Oregon markets
| Area | Cost per sq ft | vs Bend |
|---|---|---|
| Portland | $10.15 – $24.80 | +9% |
| Salem | $9.30 – $22.74 | 0% |
| Eugene | $9.14 – $22.33 | −2% |
| Medford | $9.16 – $22.40 | −2% |
| Oregon average | $9.73 – $23.79 | +4% |
Ground conditions and code in Bend
Permits in Bend
A residential permit for this work typically runs around $600 in Oregon. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Bend building department before work begins.
Hiring in Bend
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Oregon.
Frequently asked questions
How much does metal roof cost in Bend?
In 2026, metal roof costs $9.32 to $22.78 per sq ft in Bend. For a 400 sq ft project, the installed total typically lands between $3,728 and $9,113.
Is Bend more expensive than the rest of Oregon?
No. Bend actually runs about 4% below the Oregon average. Local construction wages are $33.64/hr against $36.54/hr statewide.
Do I need a permit in Bend?
Most work of this type and value requires a permit. Budget around $600 in Oregon and allow extra time for review in metro jurisdictions.
How do I compare quotes in Bend?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full metal roof calculator →