Heat Pump costs $5,379 to $12,715 in Salt Lake City in 2026. For an average 1,800 sq ft home, expect $5,379 – $12,715 installed, typically near $9,047. That is essentially in line with the Utah average.
Salt Lake City heat pump calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Salt Lake City compares with the rest of Utah
Construction wages in Salt Lake City average $29.61 per hour against $28.47 statewide, so pricing tracks the Utah norm closely.
Labor is about 38% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Heat Pump cost by project size in Salt Lake City
| Project size | Salt Lake City range | Typical |
|---|---|---|
| 1,000 sq ft home | $2,988 – $7,064 | $5,026 |
| 1,400 sq ft home | $4,184 – $9,889 | $7,037 |
| 1,800 sq ft home | $5,379 – $12,715 | $9,047 |
| 2,200 sq ft home | $6,575 – $15,540 | $11,057 |
| 2,600 sq ft home | $7,770 – $18,366 | $13,068 |
| 3,000 sq ft home | $8,965 – $21,191 | $15,078 |
Where the money goes
For an average 1,800 sq ft home in Salt Lake City at roughly $9,047, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 38% | $3,438 |
| Materials | 48% | $4,343 |
| Site prep & equipment | 8% | $724 |
| Overhead, disposal & finishing | 6% | $543 |
Salt Lake City compared with other Utah markets
| Area | Cost installed | vs Salt Lake City |
|---|---|---|
| Provo | $5,243 – $12,392 | −3% |
| Ogden | $5,288 – $12,500 | −2% |
| St. George | $5,152 – $12,178 | −4% |
| Logan | $5,167 – $12,213 | −4% |
| Utah average | $5,304 – $12,536 | −1% |
Climate and equipment sizing in Salt Lake City
Permits in Salt Lake City
A residential permit for this work typically runs around $450 in Utah. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Salt Lake City building department before work begins.
Hiring in Salt Lake City
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Utah.
Frequently asked questions
How much does heat pump cost in Salt Lake City?
In 2026, heat pump costs $5,379 to $12,715 in Salt Lake City. For an average 1,800 sq ft home, the installed total typically lands between $5,379 and $12,715.
Is Salt Lake City more expensive than the rest of Utah?
Not meaningfully. Salt Lake City prices track the Utah average closely.
Do I need a permit in Salt Lake City?
Most work of this type and value requires a permit. Budget around $450 in Utah and allow extra time for review in metro jurisdictions.
How do I compare quotes in Salt Lake City?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full heat pump calculator →