Heat Pump costs $6,028 to $14,247 in Bellingham in 2026. For an average 1,800 sq ft home, expect $6,028 – $14,247 installed, typically near $10,137. That is essentially in line with the Washington average.
Bellingham heat pump calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Bellingham compares with the rest of Washington
Construction wages in Bellingham average $39.38 per hour against $39.60 statewide, so pricing tracks the Washington norm closely.
Labor is about 38% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Heat Pump cost by project size in Bellingham
| Project size | Bellingham range | Typical |
|---|---|---|
| 1,000 sq ft home | $3,349 – $7,915 | $5,632 |
| 1,400 sq ft home | $4,688 – $11,081 | $7,885 |
| 1,800 sq ft home | $6,028 – $14,247 | $10,137 |
| 2,200 sq ft home | $7,367 – $17,413 | $12,390 |
| 2,600 sq ft home | $8,707 – $20,579 | $14,643 |
| 3,000 sq ft home | $10,046 – $23,745 | $16,896 |
Where the money goes
For an average 1,800 sq ft home in Bellingham at roughly $10,137, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 38% | $3,852 |
| Materials | 48% | $4,866 |
| Site prep & equipment | 8% | $811 |
| Overhead, disposal & finishing | 6% | $608 |
Bellingham compared with other Washington markets
| Area | Cost installed | vs Bellingham |
|---|---|---|
| Seattle | $6,209 – $14,677 | +3% |
| Spokane | $5,704 – $13,481 | −5% |
| Kennewick | $6,064 – $14,334 | +1% |
| Bremerton | $5,951 – $14,067 | −1% |
| Washington average | $6,043 – $14,284 | 0% |
Climate and equipment sizing in Bellingham
Permits in Bellingham
A residential permit for this work typically runs around $700 in Washington. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Bellingham building department before work begins.
Hiring in Bellingham
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Washington.
Frequently asked questions
How much does heat pump cost in Bellingham?
In 2026, heat pump costs $6,028 to $14,247 in Bellingham. For an average 1,800 sq ft home, the installed total typically lands between $6,028 and $14,247.
Is Bellingham more expensive than the rest of Washington?
Not meaningfully. Bellingham prices track the Washington average closely.
Do I need a permit in Bellingham?
Most work of this type and value requires a permit. Budget around $700 in Washington and allow extra time for review in metro jurisdictions.
How do I compare quotes in Bellingham?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full heat pump calculator →