Concrete Slab costs $6.30 to $12.60 per sq ft in Virginia Beach in 2026. For a 400 sq ft project, expect $2,520 – $5,040 installed, typically near $3,780. That is about 5% above the Virginia state average.
Virginia Beach concrete slab cost calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Virginia Beach costs more than the rest of Virginia
Virginia Beach carries roughly a 5% premium over the Virginia statewide figure. Three things drive that gap. Metro wages run above the state average, and labor is about 50% of this bill. Permitting and inspection are slower and more expensive inside city limits. And site access is tighter, which means smaller equipment, more hand work, and sometimes street permits for deliveries.
Statewide, Virginia averages $6.00 to $12.00 per sq ft, against $6.30 to $12.60 inside Virginia Beach. Suburbs on the metro fringe usually fall between the two.
Concrete Slab cost by project size in Virginia Beach
| Project size | Virginia Beach range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $630 – $1,260 | $945 |
| 12×12 (144 sq ft) | $907 – $1,814 | $1,361 |
| 12×16 (192 sq ft) | $1,210 – $2,419 | $1,814 |
| 16×20 (320 sq ft) | $2,016 – $4,032 | $3,024 |
| 20×20 (400 sq ft) | $2,520 – $5,040 | $3,780 |
| 24×24 (576 sq ft) | $3,629 – $7,258 | $5,443 |
| 30×40 (1,200 sq ft) | $7,560 – $15,120 | $11,340 |
Virginia Beach compared with other Virginia markets
| Area | Cost per sq ft | vs Virginia Beach |
|---|---|---|
| Richmond | $6.36 – $12.72 | +1% |
| Arlington | $7.20 – $14.40 | +14% |
| Virginia average | $6.00 – $12.00 | −5% |
Ground conditions and code in Virginia Beach
Permits in Virginia Beach
A residential permit for this work typically runs around $450 in Virginia, and metro jurisdictions like Virginia Beach usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Virginia Beach building department before work begins.
Hiring in Virginia Beach
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same dimensions and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in Virginia.
Frequently asked questions
How much does concrete slab cost in Virginia Beach?
In 2026, concrete slab costs $6.30 to $12.60 per sq ft in Virginia Beach. For a 400 sq ft project, the installed total typically lands between $2,520 and $5,040.
Is Virginia Beach more expensive than the rest of Virginia?
Yes. Virginia Beach runs about 5% above the Virginia statewide average, driven by metro wage levels, permitting, and tighter site access.
Do I need a permit in Virginia Beach?
Most work of this type and value requires a permit. Budget around $450 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Virginia Beach?
Insist on three written, itemised quotes covering identical dimensions, materials, and scope of preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete slab calculator →