Concrete Slab costs $5.94 to $11.88 per sq ft in Rutland in 2026. For a 400 sq ft project, expect $2,376 – $4,752 installed, typically near $3,564. That is about 0% above the Vermont state average.
Rutland concrete slab cost calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Rutland costs more than the rest of Vermont
Rutland carries roughly a 0% premium over the Vermont statewide figure. Three things drive that gap. Metro wages run above the state average, and labor is about 50% of this bill. Permitting and inspection are slower and more expensive inside city limits. And site access is tighter, which means smaller equipment, more hand work, and sometimes street permits for deliveries.
Statewide, Vermont averages $5.94 to $11.88 per sq ft, against $5.94 to $11.88 inside Rutland. Suburbs on the metro fringe usually fall between the two.
Concrete Slab cost by project size in Rutland
| Project size | Rutland range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $594 – $1,188 | $891 |
| 12×12 (144 sq ft) | $855 – $1,711 | $1,283 |
| 12×16 (192 sq ft) | $1,140 – $2,281 | $1,711 |
| 16×20 (320 sq ft) | $1,901 – $3,802 | $2,851 |
| 20×20 (400 sq ft) | $2,376 – $4,752 | $3,564 |
| 24×24 (576 sq ft) | $3,421 – $6,843 | $5,132 |
| 30×40 (1,200 sq ft) | $7,128 – $14,256 | $10,692 |
Rutland compared with other Vermont markets
| Area | Cost per sq ft | vs Rutland |
|---|---|---|
| Burlington | $6.42 – $12.83 | +8% |
| Montpelier | $6.06 – $12.12 | +2% |
| Vermont average | $5.94 – $11.88 | same |
Ground conditions and code in Rutland
Permits in Rutland
A residential permit for this work typically runs around $400 in Vermont, and metro jurisdictions like Rutland usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Rutland building department before work begins.
Hiring in Rutland
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same dimensions and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in Vermont.
Frequently asked questions
How much does concrete slab cost in Rutland?
In 2026, concrete slab costs $5.94 to $11.88 per sq ft in Rutland. For a 400 sq ft project, the installed total typically lands between $2,376 and $4,752.
Is Rutland more expensive than the rest of Vermont?
Yes. Rutland runs about 0% above the Vermont statewide average, driven by metro wage levels, permitting, and tighter site access.
Do I need a permit in Rutland?
Most work of this type and value requires a permit. Budget around $400 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Rutland?
Insist on three written, itemised quotes covering identical dimensions, materials, and scope of preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete slab calculator →