Concrete Slab costs $6.21 to $12.42 per sq ft in Green Bay in 2026. For a 400 sq ft project, expect $2,485 – $4,969 installed, typically near $3,727. That is about 2% above the Wisconsin state average.
Green Bay concrete slab cost calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Green Bay costs more than the rest of Wisconsin
Green Bay carries roughly a 2% premium over the Wisconsin statewide figure. Three things drive that gap. Metro wages run above the state average, and labor is about 50% of this bill. Permitting and inspection are slower and more expensive inside city limits. And site access is tighter, which means smaller equipment, more hand work, and sometimes street permits for deliveries.
Statewide, Wisconsin averages $6.09 to $12.18 per sq ft, against $6.21 to $12.42 inside Green Bay. Suburbs on the metro fringe usually fall between the two.
Concrete Slab cost by project size in Green Bay
| Project size | Green Bay range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $621 – $1,242 | $932 |
| 12×12 (144 sq ft) | $894 – $1,789 | $1,342 |
| 12×16 (192 sq ft) | $1,193 – $2,385 | $1,789 |
| 16×20 (320 sq ft) | $1,988 – $3,976 | $2,982 |
| 20×20 (400 sq ft) | $2,485 – $4,969 | $3,727 |
| 24×24 (576 sq ft) | $3,578 – $7,156 | $5,367 |
| 30×40 (1,200 sq ft) | $7,454 – $14,908 | $11,181 |
Green Bay compared with other Wisconsin markets
| Area | Cost per sq ft | vs Green Bay |
|---|---|---|
| Milwaukee | $6.58 – $13.15 | +6% |
| Madison | $6.64 – $13.28 | +7% |
| Wisconsin average | $6.09 – $12.18 | −2% |
Ground conditions and code in Green Bay
Permits in Green Bay
A residential permit for this work typically runs around $450 in Wisconsin, and metro jurisdictions like Green Bay usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Green Bay building department before work begins.
Hiring in Green Bay
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same dimensions and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in Wisconsin.
Frequently asked questions
How much does concrete slab cost in Green Bay?
In 2026, concrete slab costs $6.21 to $12.42 per sq ft in Green Bay. For a 400 sq ft project, the installed total typically lands between $2,485 and $4,969.
Is Green Bay more expensive than the rest of Wisconsin?
Yes. Green Bay runs about 2% above the Wisconsin statewide average, driven by metro wage levels, permitting, and tighter site access.
Do I need a permit in Green Bay?
Most work of this type and value requires a permit. Budget around $450 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Green Bay?
Insist on three written, itemised quotes covering identical dimensions, materials, and scope of preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete slab calculator →