Concrete Slab costs $5.64 to $11.28 per sq ft in Farmington in 2026. For a 400 sq ft project, expect $2,257 – $4,514 installed, typically near $3,385. That is essentially in line with the New Mexico average.
Farmington concrete slab calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Farmington compares with the rest of New Mexico
Construction wages in Farmington average $27.66 per hour against $27.04 statewide, so pricing tracks the New Mexico norm closely.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Concrete Slab cost by project size in Farmington
| Project size | Farmington range | Typical |
|---|---|---|
| 100 sq ft | $564 – $1,128 | $846 |
| 200 sq ft | $1,128 – $2,257 | $1,693 |
| 300 sq ft | $1,693 – $3,385 | $2,539 |
| 400 sq ft | $2,257 – $4,514 | $3,385 |
| 600 sq ft | $3,385 – $6,771 | $5,078 |
| 800 sq ft | $4,514 – $9,028 | $6,771 |
| 1,000 sq ft | $5,642 – $11,285 | $8,464 |
| 1,500 sq ft | $8,464 – $16,927 | $12,695 |
Where the money goes
For a 400 sq ft project in Farmington at roughly $3,385, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $1,693 |
| Materials | 36% | $1,219 |
| Site prep & equipment | 8% | $271 |
| Overhead, disposal & finishing | 6% | $203 |
Farmington compared with other New Mexico markets
| Area | Cost per sq ft | vs Farmington |
|---|---|---|
| Albuquerque | $5.54 – $11.09 | −2% |
| Eastern New Mexico nonmetropolitan area | $5.61 – $11.22 | −1% |
| Las Cruces | $5.35 – $10.69 | −5% |
| Northern New Mexico nonmetropolitan area | $5.56 – $11.12 | −1% |
| New Mexico average | $5.58 – $11.17 | −1% |
Ground conditions and code in Farmington
Permits in Farmington
A residential permit for this work typically runs around $350 in New Mexico. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Farmington building department before work begins.
Hiring in Farmington
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in New Mexico.
Frequently asked questions
How much does concrete slab cost in Farmington?
In 2026, concrete slab costs $5.64 to $11.28 per sq ft in Farmington. For a 400 sq ft project, the installed total typically lands between $2,257 and $4,514.
Is Farmington more expensive than the rest of New Mexico?
Not meaningfully. Farmington prices track the New Mexico average closely.
Do I need a permit in Farmington?
Most work of this type and value requires a permit. Budget around $350 in New Mexico and allow extra time for review in metro jurisdictions.
How do I compare quotes in Farmington?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete slab calculator →