Concrete Patio costs $7.00 to $16.00 per sq ft in Ohio in 2026. For a 400 sq ft project, that puts the installed total at $2,800 – $6,400, with most projects landing near $4,600. Ohio is essentially in line with the national average.
Why Ohio prices differ from the national average
Roughly 52% of the installed cost of concrete patio is labor, and labor is the part of the bill that actually moves between states. Ohio construction wages average $36.97 per hour against a national figure near $36.97 — a wage index of 1.00×.
Materials behave differently. Ready-mix concrete, rebar, mesh, and forming lumber are priced on national and regional commodity markets, so they barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Ohio at $7.00 to $16.00 per sq ft, against a national baseline of $7.00 to $16.00.
Two other forces sit on top of that. Metro areas inside Ohio price above the statewide figure because of wages, permitting, and site access. And the state’s deep frost line adds excavation and below-grade volume that southern states never pay for.
Concrete Patio cost by project size in Ohio
These figures apply the Ohio rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Ohio cost range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $700 – $1,600 | $1,150 |
| 12×12 (144 sq ft) | $1,008 – $2,304 | $1,656 |
| 12×16 (192 sq ft) | $1,344 – $3,072 | $2,208 |
| 16×20 (320 sq ft) | $2,240 – $5,120 | $3,680 |
| 20×20 (400 sq ft) | $2,800 – $6,400 | $4,600 |
| 24×24 (576 sq ft) | $4,032 – $9,216 | $6,624 |
| 30×40 (1,200 sq ft) | $8,400 – $19,200 | $13,800 |
Where the money actually goes
For a 400 sq ft project in Ohio at roughly $4,600, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 52% | $2,392 |
| Materials | 36% | $1,656 |
| Site prep & equipment | 7% | $331 |
| Overhead, disposal & finishing | 5% | $221 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Concrete Patio cost by city in Ohio
Statewide averages hide a lot. Columbus, Cleveland, Cincinnati all price above the Ohio average, while rural counties run below it:
| Area | Cost per sq ft | A 400 sq ft project | vs state |
|---|---|---|---|
| Columbus | $7.49 – $17.12 | $4,922 | +7% |
| Cleveland | $7.42 – $16.96 | $4,876 | +6% |
| Cincinnati | $7.35 – $16.80 | $4,830 | +5% |
| Rural Ohio | $6.51 – $14.88 | $4,278 | −7% |
What is included in a Ohio quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $400 in Ohio), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Ohio
Permits in Ohio
A residential permit for work of this type and value in Ohio typically runs around $400, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-sq ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Ohio
Ohio has a solid working season from spring through late autumn, with a genuine winter slowdown. Demand peaks in late spring and early summer, which is also when quotes are highest. Scheduling in early spring or after the autumn rush often saves money.
DIY versus hiring a contractor in Ohio
Materials account for roughly 48% of the installed price, so a 400 sq ft project carries about $2,208 in materials against an installed cost near $4,600. The gap is labor, equipment, and the risk of getting it wrong.
Because Ohio labor runs at 1.00× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Ohio compares with nearby states
Ohio sits in the Midwest region. Here is how neighbouring states price the same specification:
| State | Cost per sq ft | vs Ohio |
|---|---|---|
| South Dakota | $6.45 – $14.75 | Lower than Ohio |
| Kansas | $6.75 – $15.42 | Lower than Ohio |
| Nebraska | $6.78 – $15.50 | Lower than Ohio |
| Iowa | $6.82 – $15.58 | Lower than Ohio |
| Missouri | $6.82 – $15.58 | Lower than Ohio |
| Indiana | $6.85 – $15.67 | Lower than Ohio |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Ohio rates already applied:
Open the concrete patio calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does concrete patio cost in Ohio?
In 2026, concrete patio costs $7.00 to $16.00 per sq ft in Ohio. For a 400 sq ft project, the installed total typically lands between $2,800 and $6,400, with most projects near $4,600.
Is concrete patio more expensive in Ohio than the national average?
Ohio is essentially in line with the national average. The driver is a construction wage index of 1.00 times the national figure, applied to the roughly 52% of the project cost that is labor.
Which parts of Ohio are most expensive?
Columbus, Cleveland, and Cincinnati price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Ohio?
Most municipalities in Ohio require a permit for work of this type and value. Budget around $400 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Ohio?
The frost line in Ohio is roughly 32 inches. Footings and posts must extend below that depth to avoid frost heave, which adds excavation and material to the job.
When is the cheapest time to book this work in Ohio?
Ohio has a solid working season from spring through late autumn, with a genuine winter slowdown. Demand peaks in late spring and early summer, which is also when quotes are highest. Scheduling in early spring or after the autumn rush often saves money.
How much of the cost is labor versus materials?
Labor is about 52% of the installed price and materials about 48%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Ohio vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.