Concrete Driveway costs $7.27 to $16.36 per sq ft in Tuscaloosa in 2026. For a 400 sq ft project, expect $2,908 – $6,544 installed, typically near $4,726. That is about 2% above the Alabama average.
Tuscaloosa concrete driveway calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Tuscaloosa runs above the Alabama average
Construction wages in Tuscaloosa average $25.69 per hour against $24.82 statewide, so labor-heavy work prices above the Alabama norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Concrete Driveway cost by project size in Tuscaloosa
| Project size | Tuscaloosa range | Typical |
|---|---|---|
| 100 sq ft | $727 – $1,636 | $1,181 |
| 200 sq ft | $1,454 – $3,272 | $2,363 |
| 300 sq ft | $2,181 – $4,908 | $3,544 |
| 400 sq ft | $2,908 – $6,544 | $4,726 |
| 600 sq ft | $4,362 – $9,815 | $7,089 |
| 800 sq ft | $5,816 – $13,087 | $9,452 |
| 1,000 sq ft | $7,271 – $16,359 | $11,815 |
| 1,500 sq ft | $10,906 – $24,538 | $17,722 |
Where the money goes
For a 400 sq ft project in Tuscaloosa at roughly $4,726, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,363 |
| Materials | 36% | $1,701 |
| Site prep & equipment | 8% | $378 |
| Overhead, disposal & finishing | 6% | $284 |
Tuscaloosa compared with other Alabama markets
| Area | Cost per sq ft | vs Tuscaloosa |
|---|---|---|
| Birmingham | $7.35 – $16.54 | +1% |
| Mobile | $7.19 – $16.19 | −1% |
| Huntsville | $7.21 – $16.23 | −1% |
| Montgomery | $7.04 – $15.85 | −3% |
| Alabama average | $7.16 – $16.11 | −2% |
Ground conditions and code in Tuscaloosa
Permits in Tuscaloosa
A residential permit for this work typically runs around $350 in Alabama. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Tuscaloosa building department before work begins.
Hiring in Tuscaloosa
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Alabama.
Frequently asked questions
How much does concrete driveway cost in Tuscaloosa?
In 2026, concrete driveway costs $7.27 to $16.36 per sq ft in Tuscaloosa. For a 400 sq ft project, the installed total typically lands between $2,908 and $6,544.
Is Tuscaloosa more expensive than the rest of Alabama?
Yes. Tuscaloosa runs about 2% above the Alabama average, because local construction wages ($25.69/hr) sit above the statewide figure of $24.82/hr.
Do I need a permit in Tuscaloosa?
Most work of this type and value requires a permit. Budget around $350 in Alabama and allow extra time for review in metro jurisdictions.
How do I compare quotes in Tuscaloosa?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete driveway calculator →