Concrete Driveway costs $7.73 to $17.40 per sq ft in Salisbury in 2026. For a 400 sq ft project, expect $3,093 – $6,959 installed, typically near $5,026. That is about 3% below the Maryland average.
Salisbury concrete driveway calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Salisbury runs below the Maryland average
Construction wages in Salisbury average $29.33 per hour against $31.34 statewide. Salisbury sits below the Maryland average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Concrete Driveway cost by project size in Salisbury
| Project size | Salisbury range | Typical |
|---|---|---|
| 100 sq ft | $773 – $1,740 | $1,257 |
| 200 sq ft | $1,547 – $3,480 | $2,513 |
| 300 sq ft | $2,320 – $5,220 | $3,770 |
| 400 sq ft | $3,093 – $6,959 | $5,026 |
| 600 sq ft | $4,640 – $10,439 | $7,539 |
| 800 sq ft | $6,186 – $13,919 | $10,053 |
| 1,000 sq ft | $7,733 – $17,399 | $12,566 |
| 1,500 sq ft | $11,599 – $26,098 | $18,849 |
Where the money goes
For a 400 sq ft project in Salisbury at roughly $5,026, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,513 |
| Materials | 36% | $1,809 |
| Site prep & equipment | 8% | $402 |
| Overhead, disposal & finishing | 6% | $302 |
Salisbury compared with other Maryland markets
| Area | Cost per sq ft | vs Salisbury |
|---|---|---|
| Baltimore | $7.88 – $17.73 | +2% |
| Maryland nonmetropolitan area | $7.45 – $16.77 | −4% |
| Hagerstown | $7.48 – $16.83 | −3% |
| Lexington Park | $7.78 – $17.52 | +1% |
| Maryland average | $7.99 – $17.97 | +3% |
Ground conditions and code in Salisbury
Permits in Salisbury
A residential permit for this work typically runs around $500 in Maryland. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Salisbury building department before work begins.
Hiring in Salisbury
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Maryland.
Frequently asked questions
How much does concrete driveway cost in Salisbury?
In 2026, concrete driveway costs $7.73 to $17.40 per sq ft in Salisbury. For a 400 sq ft project, the installed total typically lands between $3,093 and $6,959.
Is Salisbury more expensive than the rest of Maryland?
No. Salisbury actually runs about 3% below the Maryland average. Local construction wages are $29.33/hr against $31.34/hr statewide.
Do I need a permit in Salisbury?
Most work of this type and value requires a permit. Budget around $500 in Maryland and allow extra time for review in metro jurisdictions.
How do I compare quotes in Salisbury?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete driveway calculator →