Concrete Driveway costs $9.03 to $20.32 per sq ft in New York in 2026. For a 400 sq ft project, expect $3,612 – $8,127 installed, typically near $5,869. That is about 4% above the New York average.
New York concrete driveway calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why New York runs above the New York average
Construction wages in New York average $39.49 per hour against $36.85 statewide, so labor-heavy work prices above the New York norm here.
Labor is about 50% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Concrete Driveway cost by project size in New York
| Project size | New York range | Typical |
|---|---|---|
| 100 sq ft | $903 – $2,032 | $1,467 |
| 200 sq ft | $1,806 – $4,063 | $2,935 |
| 300 sq ft | $2,709 – $6,095 | $4,402 |
| 400 sq ft | $3,612 – $8,127 | $5,869 |
| 600 sq ft | $5,418 – $12,190 | $8,804 |
| 800 sq ft | $7,224 – $16,254 | $11,739 |
| 1,000 sq ft | $9,030 – $20,317 | $14,673 |
| 1,500 sq ft | $13,545 – $30,476 | $22,010 |
Where the money goes
For a 400 sq ft project in New York at roughly $5,869, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,935 |
| Materials | 36% | $2,113 |
| Site prep & equipment | 8% | $470 |
| Overhead, disposal & finishing | 6% | $352 |
New York compared with other New York markets
| Area | Cost per sq ft | vs New York |
|---|---|---|
| Buffalo | $8.16 – $18.36 | −10% |
| Rochester | $8.13 – $18.30 | −10% |
| Albany | $8.34 – $18.75 | −8% |
| Syracuse | $8.20 – $18.46 | −9% |
| New York average | $8.69 – $19.56 | −4% |
Ground conditions and code in New York
Permits in New York
A residential permit for this work typically runs around $800 in New York. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the New York building department before work begins.
Hiring in New York
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in New York.
Frequently asked questions
How much does concrete driveway cost in New York?
In 2026, concrete driveway costs $9.03 to $20.32 per sq ft in New York. For a 400 sq ft project, the installed total typically lands between $3,612 and $8,127.
Is New York more expensive than the rest of New York?
Yes. New York runs about 4% above the New York average, because local construction wages ($39.49/hr) sit above the statewide figure of $36.85/hr.
Do I need a permit in New York?
Most work of this type and value requires a permit. Budget around $800 in New York and allow extra time for review in metro jurisdictions.
How do I compare quotes in New York?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete driveway calculator →