Concrete Driveway costs $7.88 to $17.73 per sq ft in Maine in 2026. For a 400 sq ft project, that puts the installed total at $3,152 – $7,092, with most projects landing near $5,122. Maine is about 2% below the national average.
Maine concrete driveway cost calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Maine prices differ from the national average
Roughly 50% of the installed cost of concrete driveway is labor, and labor is the part of the bill that actually moves between states. Maine construction wages average $35.86 per hour against a national figure near $36.97 — a wage index of 0.97×.
Materials behave differently. Ready-mix concrete, rebar, mesh, and forming lumber are priced on national and regional commodity markets, so they barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Maine at $7.88 to $17.73 per sq ft, against a national baseline of $8.00 to $18.00.
Two other forces sit on top of that. Metro areas inside Maine price above the statewide figure because of wages, permitting, and site access. And the state’s deep frost line adds excavation and below-grade volume that southern states never pay for.
Concrete Driveway cost by project size in Maine
These figures apply the Maine rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Maine cost range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $788 – $1,773 | $1,281 |
| 12×12 (144 sq ft) | $1,135 – $2,553 | $1,844 |
| 12×16 (192 sq ft) | $1,513 – $3,404 | $2,459 |
| 16×20 (320 sq ft) | $2,522 – $5,674 | $4,098 |
| 20×20 (400 sq ft) | $3,152 – $7,092 | $5,122 |
| 24×24 (576 sq ft) | $4,539 – $10,212 | $7,376 |
| 30×40 (1,200 sq ft) | $9,456 – $21,276 | $15,366 |
Where the money actually goes
For a 400 sq ft project in Maine at roughly $5,122, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 50% | $2,561 |
| Materials | 38% | $1,921 |
| Site prep & equipment | 8% | $384 |
| Overhead, disposal & finishing | 5% | $256 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Concrete Driveway cost by city in Maine
Statewide averages hide a lot. Portland, Bangor, Lewiston all price above the Maine average, while rural counties run below it:
| Area | Cost per sq ft | A 400 sq ft project | vs state |
|---|---|---|---|
| Portland | $8.67 – $19.50 | $5,634 | +10% |
| Bangor | $7.96 – $17.91 | $5,173 | +1% |
| Lewiston | $8.04 – $18.08 | $5,224 | +2% |
| Rural Maine | $7.33 – $16.49 | $4,763 | −7% |
What is included in a Maine quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $400 in Maine), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Maine
Permits in Maine
A residential permit for work of this type and value in Maine typically runs around $400, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-sq ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Maine
Weather closes the working window in Maine. Concrete and exterior work generally run from late spring through early autumn, and crews book out well before then. Cold-weather work is possible with blankets, heated enclosures, or accelerating admixtures, but those add cost. Booking in late winter for spring work usually secures better pricing than calling in June.
DIY versus hiring a contractor in Maine
Materials account for roughly 50% of the installed price, so a 400 sq ft project carries about $2,561 in materials against an installed cost near $5,122. The gap is labor, equipment, and the risk of getting it wrong.
Because Maine labor runs at 0.97× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Maine compares with nearby states
Maine sits in the Northeast region. Here is how neighbouring states price the same specification:
| State | Cost per sq ft | vs Maine |
|---|---|---|
| Vermont | $7.92 – $17.82 | Higher than Maine |
| Delaware | $8.16 – $18.36 | Higher than Maine |
| New Hampshire | $8.16 – $18.36 | Higher than Maine |
| Pennsylvania | $8.20 – $18.45 | Higher than Maine |
| Rhode Island | $8.28 – $18.63 | Higher than Maine |
| Maryland | $8.32 – $18.72 | Higher than Maine |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Maine rates already applied:
Open the concrete driveway calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does concrete driveway cost in Maine?
In 2026, concrete driveway costs $7.88 to $17.73 per sq ft in Maine. For a 400 sq ft project, the installed total typically lands between $3,152 and $7,092, with most projects near $5,122.
Is concrete driveway more expensive in Maine than the national average?
Maine is about 2% below the national average. The driver is a construction wage index of 0.97 times the national figure, applied to the roughly 50% of the project cost that is labor.
Which parts of Maine are most expensive?
Portland, Bangor, and Lewiston price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Maine?
Most municipalities in Maine require a permit for work of this type and value. Budget around $400 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Maine?
The frost line in Maine is roughly 60 inches. Footings and posts must extend below that depth to avoid frost heave, which adds excavation and material to the job.
When is the cheapest time to book this work in Maine?
Weather closes the working window in Maine. Concrete and exterior work generally run from late spring through early autumn, and crews book out well before then. Cold-weather work is possible with blankets, heated enclosures, or accelerating admixtures, but those add cost. Booking in late winter for spring work usually secures better pricing than calling in June.
How much of the cost is labor versus materials?
Labor is about 50% of the installed price and materials about 50%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Maine vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.