Concrete Driveway costs $8.50 to $19.13 per sq ft in Kansas City in 2026. For a 400 sq ft project, expect $3,401 – $7,652 installed, typically near $5,526. That is about 9% above the Missouri state average.
Kansas City concrete driveway cost calculator
Planning estimate only. State pricing applies a construction wage index to the labor share; materials are held at national prices. Get three written quotes before committing.
Why Kansas City costs more than the rest of Missouri
Kansas City carries roughly a 9% premium over the Missouri statewide figure. Three things drive that gap. Metro wages run above the state average, and labor is about 50% of this bill. Permitting and inspection are slower and more expensive inside city limits. And site access is tighter, which means smaller equipment, more hand work, and sometimes street permits for deliveries.
Statewide, Missouri averages $7.80 to $17.55 per sq ft, against $8.50 to $19.13 inside Kansas City. Suburbs on the metro fringe usually fall between the two.
Concrete Driveway cost by project size in Kansas City
| Project size | Kansas City range | Typical |
|---|---|---|
| 10×10 (100 sq ft) | $850 – $1,913 | $1,382 |
| 12×12 (144 sq ft) | $1,224 – $2,755 | $1,989 |
| 12×16 (192 sq ft) | $1,632 – $3,673 | $2,653 |
| 16×20 (320 sq ft) | $2,721 – $6,121 | $4,421 |
| 20×20 (400 sq ft) | $3,401 – $7,652 | $5,526 |
| 24×24 (576 sq ft) | $4,897 – $11,019 | $7,958 |
| 30×40 (1,200 sq ft) | $10,202 – $22,955 | $16,579 |
Kansas City compared with other Missouri markets
| Area | Cost per sq ft | vs Kansas City |
|---|---|---|
| St. Louis | $8.42 – $18.95 | -1% |
| Springfield | $7.80 – $17.55 | -8% |
| Missouri average | $7.80 – $17.55 | −9% |
Ground conditions and code in Kansas City
Permits in Kansas City
A residential permit for this work typically runs around $350 in Missouri, and metro jurisdictions like Kansas City usually sit at the upper end of that range with longer review times. Permit cost is rarely included in a contractor quote, so add it separately. Confirm scope with the Kansas City building department before work begins.
Hiring in Kansas City
Get three written, itemised quotes from licensed and insured contractors, and make sure each specifies the same dimensions and the same grade of material. In a metro market, the cheapest bid often reflects a thinner specification or a crew travelling in from outside the area rather than a genuine saving. Ask for local references and check that the licence is current in Missouri.
Frequently asked questions
How much does concrete driveway cost in Kansas City?
In 2026, concrete driveway costs $8.50 to $19.13 per sq ft in Kansas City. For a 400 sq ft project, the installed total typically lands between $3,401 and $7,652.
Is Kansas City more expensive than the rest of Missouri?
Yes. Kansas City runs about 9% above the Missouri statewide average, driven by metro wage levels, permitting, and tighter site access.
Do I need a permit in Kansas City?
Most work of this type and value requires a permit. Budget around $350 and allow extra time for review, since metro jurisdictions are typically slower than rural ones.
How do I compare quotes in Kansas City?
Insist on three written, itemised quotes covering identical dimensions, materials, and scope of preparation. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full concrete driveway calculator →