Chain Link Fence costs $10.94 to $27.35 per linear ft in Winston in 2026. For a 150-foot run, expect $1,641 – $4,103 installed, typically near $2,872. That is about 2% below the North Carolina average.
Winston chain link fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Winston runs below the North Carolina average
Construction wages in Winston average $25.25 per hour against $26.42 statewide. Winston sits below the North Carolina average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 45% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Chain Link Fence cost by project size in Winston
| Project size | Winston range | Typical |
|---|---|---|
| 50 ft | $547 – $1,368 | $957 |
| 100 ft | $1,094 – $2,735 | $1,915 |
| 150 ft | $1,641 – $4,103 | $2,872 |
| 200 ft | $2,188 – $5,471 | $3,830 |
| 250 ft | $2,735 – $6,838 | $4,787 |
| 300 ft | $3,282 – $8,206 | $5,744 |
| 400 ft | $4,377 – $10,942 | $7,659 |
| 500 ft | $5,471 – $13,677 | $9,574 |
Where the money goes
For a 150-foot run in Winston at roughly $2,872, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,292 |
| Materials | 41% | $1,178 |
| Site prep & equipment | 8% | $230 |
| Overhead, disposal & finishing | 6% | $172 |
Winston compared with other North Carolina markets
| Area | Cost per linear ft | vs Winston |
|---|---|---|
| Charlotte | $11.33 – $28.33 | +4% |
| Raleigh | $11.35 – $28.39 | +4% |
| Greensboro | $11.09 – $27.72 | +1% |
| Wilmington | $11.07 – $27.67 | +1% |
| North Carolina average | $11.14 – $27.85 | +2% |
Ground conditions and code in Winston
Permits in Winston
A residential permit for this work typically runs around $400 in North Carolina. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Winston building department before work begins.
Hiring in Winston
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in North Carolina.
Frequently asked questions
How much does chain link fence cost in Winston?
In 2026, chain link fence costs $10.94 to $27.35 per linear ft in Winston. For a 150-foot run, the installed total typically lands between $1,641 and $4,103.
Is Winston more expensive than the rest of North Carolina?
No. Winston actually runs about 2% below the North Carolina average. Local construction wages are $25.25/hr against $26.42/hr statewide.
Do I need a permit in Winston?
Most work of this type and value requires a permit. Budget around $400 in North Carolina and allow extra time for review in metro jurisdictions.
How do I compare quotes in Winston?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full chain link fence calculator →