Chain Link Fence costs $12.88 to $32.20 per linear ft in San Diego in 2026. For a 150-foot run, expect $1,932 – $4,831 installed, typically near $3,381. That is essentially in line with the California average.
San Diego chain link fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How San Diego compares with the rest of California
Construction wages in San Diego average $36.54 per hour against $37.64 statewide, so pricing tracks the California norm closely.
Labor is about 45% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Chain Link Fence cost by project size in San Diego
| Project size | San Diego range | Typical |
|---|---|---|
| 50 ft | $644 – $1,610 | $1,127 |
| 100 ft | $1,288 – $3,220 | $2,254 |
| 150 ft | $1,932 – $4,831 | $3,381 |
| 200 ft | $2,576 – $6,441 | $4,509 |
| 250 ft | $3,220 – $8,051 | $5,636 |
| 300 ft | $3,864 – $9,661 | $6,763 |
| 400 ft | $5,153 – $12,882 | $9,017 |
| 500 ft | $6,441 – $16,102 | $11,271 |
Where the money goes
For a 150-foot run in San Diego at roughly $3,381, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,522 |
| Materials | 41% | $1,386 |
| Site prep & equipment | 8% | $271 |
| Overhead, disposal & finishing | 6% | $203 |
San Diego compared with other California markets
| Area | Cost per linear ft | vs San Diego |
|---|---|---|
| Los Angeles | $12.97 – $32.43 | +1% |
| San Francisco | $14.10 – $35.26 | +9% |
| Riverside | $12.56 – $31.40 | −3% |
| Sacramento | $12.86 – $32.16 | 0% |
| California average | $13.07 – $32.67 | +1% |
Ground conditions and code in San Diego
Permits in San Diego
A residential permit for this work typically runs around $900 in California. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the San Diego building department before work begins.
Hiring in San Diego
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in California.
Frequently asked questions
How much does chain link fence cost in San Diego?
In 2026, chain link fence costs $12.88 to $32.20 per linear ft in San Diego. For a 150-foot run, the installed total typically lands between $1,932 and $4,831.
Is San Diego more expensive than the rest of California?
Not meaningfully. San Diego prices track the California average closely.
Do I need a permit in San Diego?
Most work of this type and value requires a permit. Budget around $900 in California and allow extra time for review in metro jurisdictions.
How do I compare quotes in San Diego?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full chain link fence calculator →