Chain Link Fence costs $11.68 to $29.19 per linear ft in Nebraska in 2026. For a 150-foot run, that puts the installed total at $1,751 – $4,379, with most projects landing near $3,065. Nebraska is about 3% below the national average.
Why Nebraska prices differ from the national average
Roughly 45% of the installed cost of chain link fence is labor, and labor is the part of the bill that actually moves between states. Nebraska construction wages average $34.75 per hour against a national figure near $36.97 — a wage index of 0.94×.
Materials behave differently. Fence panels, posts, rails, and hardware are priced by national manufacturers and distributors, so material costs barely move from one state to the next. That is why we apply the wage index only to the labor share and hold materials at national prices. Doing that puts Nebraska at $11.68 to $29.19 per linear ft, against a national baseline of $12.00 to $30.00.
Two other forces sit on top of that. Metro areas inside Nebraska price above the statewide figure because of wages, permitting, and site access. And the state’s deep frost line adds excavation and below-grade volume that southern states never pay for.
Chain Link Fence cost by project size in Nebraska
These figures apply the Nebraska rate to common project sizes. They cover a standard specification with normal site access.
| Project size | Nebraska cost range | Typical |
|---|---|---|
| 50 ft | $584 – $1,460 | $1,022 |
| 100 ft | $1,168 – $2,919 | $2,043 |
| 150 ft | $1,751 – $4,379 | $3,065 |
| 200 ft | $2,335 – $5,838 | $4,087 |
| 250 ft | $2,919 – $7,298 | $5,108 |
| 300 ft | $3,503 – $8,757 | $6,130 |
| 400 ft | $4,670 – $11,676 | $8,173 |
| 500 ft | $5,838 – $14,595 | $10,217 |
Where the money actually goes
For a 150-foot run in Nebraska at roughly $3,065, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,379 |
| Materials | 41% | $1,264 |
| Site prep & equipment | 8% | $253 |
| Overhead, disposal & finishing | 6% | $169 |
The labor share is why identical projects diverge so sharply between states. It is also why a bid that comes in far below these numbers usually means a thinner specification or a crew cutting site prep, not a genuine bargain.
Chain Link Fence cost by city in Nebraska
Statewide averages hide a lot. Omaha, Lincoln, Bellevue all price above the Nebraska average, while rural counties run below it:
| Area | Cost per linear ft | A 150-foot run | vs state |
|---|---|---|---|
| Omaha | $12.49 – $31.23 | $3,279 | +7% |
| Lincoln | $12.03 – $30.07 | $3,157 | +3% |
| Bellevue | $12.14 – $30.36 | $3,188 | +4% |
| Rural Nebraska | $10.86 – $27.15 | $2,850 | −7% |
What is included in a Nebraska quote — and what is not
A complete quote for this work should list dimensions, specification and grade, site preparation, materials, labor, cleanup, and disposal. Those are the items already reflected in the ranges above.
Costs that usually sit outside the headline number: permits (around $300 in Nebraska), demolition or removal of existing work, unusual site access, drainage or grading corrections, and any upgrade to the standard specification. When two bids differ by thousands, the gap is nearly always one of these, not the labor rate.
Frost depth and code requirements in Nebraska
Permits in Nebraska
A residential permit for work of this type and value in Nebraska typically runs around $300, though the figure varies by municipality and often scales with declared project value. Permit cost is rarely folded into a contractor’s per-linear ft quote, so add it separately when comparing bids. Confirm requirements with your local building department before work begins — unpermitted work can surface later during a sale or insurance claim.
Best time of year to schedule in Nebraska
Nebraska has a solid working season from spring through late autumn, with a genuine winter slowdown. Demand peaks in late spring and early summer, which is also when quotes are highest. Scheduling in early spring or after the autumn rush often saves money.
DIY versus hiring a contractor in Nebraska
Materials account for roughly 55% of the installed price, so a 150-foot run carries about $1,686 in materials against an installed cost near $3,065. The gap is labor, equipment, and the risk of getting it wrong.
Because Nebraska labor runs at 0.94× the national rate, the DIY saving here is closer to the national norm. Weigh it against tool rental, waste disposal, permit responsibility, and the fact that remedial work almost always costs more than doing it right the first time.
How Nebraska compares with nearby states
Nebraska sits in the Midwest region. Here is how neighbouring states price the same specification:
| State | Cost per linear ft | vs Nebraska |
|---|---|---|
| South Dakota | $11.19 – $27.98 | Lower than Nebraska |
| Kansas | $11.62 – $29.06 | Lower than Nebraska |
| Iowa | $11.73 – $29.33 | Higher than Nebraska |
| Missouri | $11.73 – $29.33 | Higher than Nebraska |
| Indiana | $11.78 – $29.46 | Higher than Nebraska |
| North Dakota | $11.95 – $29.87 | Higher than Nebraska |
Getting an accurate number for your project
Everything above is a planning range. Enter your real dimensions and specification to get a figure with Nebraska rates already applied:
Open the chain link fence calculator →Then get three written, itemised quotes. Make sure each one specifies the same dimensions and the same grade of material — that is the only way a comparison means anything.
Frequently asked questions
How much does chain link fence cost in Nebraska?
In 2026, chain link fence costs $11.68 to $29.19 per linear ft in Nebraska. For a 150-foot run, the installed total typically lands between $1,751 and $4,379, with most projects near $3,065.
Is chain link fence more expensive in Nebraska than the national average?
Nebraska is about 3% below the national average. The driver is a construction wage index of 0.94 times the national figure, applied to the roughly 45% of the project cost that is labor.
Which parts of Nebraska are most expensive?
Omaha, Lincoln, and Bellevue price above the statewide average because of higher wages, stricter permitting, and tighter site access. Rural counties typically run around 7% below the state figure.
Do I need a permit in Nebraska?
Most municipalities in Nebraska require a permit for work of this type and value. Budget around $300 and confirm with your local building department before work starts, since requirements vary between cities and counties.
How deep is the frost line in Nebraska?
The frost line in Nebraska is roughly 36 inches. Footings and posts must extend below that depth to avoid frost heave, which adds excavation and material to the job.
When is the cheapest time to book this work in Nebraska?
Nebraska has a solid working season from spring through late autumn, with a genuine winter slowdown. Demand peaks in late spring and early summer, which is also when quotes are highest. Scheduling in early spring or after the autumn rush often saves money.
How much of the cost is labor versus materials?
Labor is about 45% of the installed price and materials about 55%. That split is why state wage differences move the total so much, and why material price swings move it less than people expect.
Why do contractor quotes in Nebraska vary so much?
Three things move a quote most: metro versus rural location, site access and preparation, and the specification itself. Two bids are only comparable when both list the same dimensions, the same grade of material, and the same scope of prep work.