Chain Link Fence costs $11.55 to $28.88 per linear ft in Grand Junction in 2026. For a 150-foot run, expect $1,733 – $4,332 installed, typically near $3,033. That is about 4% below the Colorado average.
Grand Junction chain link fence calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Grand Junction runs below the Colorado average
Construction wages in Grand Junction average $28.83 per hour against $31.67 statewide. Grand Junction sits below the Colorado average because the statewide figure is pulled up by higher-wage metros elsewhere in the state.
Labor is about 45% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Chain Link Fence cost by project size in Grand Junction
| Project size | Grand Junction range | Typical |
|---|---|---|
| 50 ft | $578 – $1,444 | $1,011 |
| 100 ft | $1,155 – $2,888 | $2,022 |
| 150 ft | $1,733 – $4,332 | $3,033 |
| 200 ft | $2,311 – $5,777 | $4,044 |
| 250 ft | $2,888 – $7,221 | $5,055 |
| 300 ft | $3,466 – $8,665 | $6,065 |
| 400 ft | $4,621 – $11,553 | $8,087 |
| 500 ft | $5,777 – $14,442 | $10,109 |
Where the money goes
For a 150-foot run in Grand Junction at roughly $3,033, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 45% | $1,365 |
| Materials | 41% | $1,243 |
| Site prep & equipment | 8% | $243 |
| Overhead, disposal & finishing | 6% | $182 |
Grand Junction compared with other Colorado markets
| Area | Cost per linear ft | vs Grand Junction |
|---|---|---|
| Denver | $12.27 – $30.68 | +6% |
| Colorado Springs | $11.70 – $29.25 | +1% |
| Greeley | $11.73 – $29.32 | +2% |
| Fort Collins | $11.81 – $29.52 | +2% |
| Colorado average | $12.04 – $30.11 | +4% |
Ground conditions and code in Grand Junction
Permits in Grand Junction
A residential permit for this work typically runs around $550 in Colorado. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Grand Junction building department before work begins.
Hiring in Grand Junction
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Colorado.
Frequently asked questions
How much does chain link fence cost in Grand Junction?
In 2026, chain link fence costs $11.55 to $28.88 per linear ft in Grand Junction. For a 150-foot run, the installed total typically lands between $1,733 and $4,332.
Is Grand Junction more expensive than the rest of Colorado?
No. Grand Junction actually runs about 4% below the Colorado average. Local construction wages are $28.83/hr against $31.67/hr statewide.
Do I need a permit in Grand Junction?
Most work of this type and value requires a permit. Budget around $550 in Colorado and allow extra time for review in metro jurisdictions.
How do I compare quotes in Grand Junction?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full chain link fence calculator →