Furnace Installation costs $3,292 to $7,524 in Knoxville in 2026. For an average 1,800 sq ft home, expect $3,292 – $7,524 installed, typically near $5,408. That is essentially in line with the Tennessee average.
Knoxville furnace installation calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
How Knoxville compares with the rest of Tennessee
Construction wages in Knoxville average $26.73 per hour against $27.17 statewide, so pricing tracks the Tennessee norm closely.
Labor is about 40% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Furnace Installation cost by project size in Knoxville
| Project size | Knoxville range | Typical |
|---|---|---|
| 1,000 sq ft home | $1,829 – $4,180 | $3,004 |
| 1,400 sq ft home | $2,560 – $5,852 | $4,206 |
| 1,800 sq ft home | $3,292 – $7,524 | $5,408 |
| 2,200 sq ft home | $4,023 – $9,196 | $6,609 |
| 2,600 sq ft home | $4,755 – $10,868 | $7,811 |
| 3,000 sq ft home | $5,486 – $12,540 | $9,013 |
Where the money goes
For an average 1,800 sq ft home in Knoxville at roughly $5,408, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 40% | $2,163 |
| Materials | 46% | $2,488 |
| Site prep & equipment | 8% | $433 |
| Overhead, disposal & finishing | 6% | $324 |
Knoxville compared with other Tennessee markets
| Area | Cost installed | vs Knoxville |
|---|---|---|
| Nashville | $3,373 – $7,709 | +2% |
| Memphis | $3,312 – $7,571 | +1% |
| Chattanooga | $3,323 – $7,596 | +1% |
| Kingsport | $3,266 – $7,466 | −1% |
| Tennessee average | $3,311 – $7,568 | +1% |
Climate and equipment sizing in Knoxville
Permits in Knoxville
A residential permit for this work typically runs around $350 in Tennessee. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Knoxville building department before work begins.
Hiring in Knoxville
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Tennessee.
Frequently asked questions
How much does furnace installation cost in Knoxville?
In 2026, furnace installation costs $3,292 to $7,524 in Knoxville. For an average 1,800 sq ft home, the installed total typically lands between $3,292 and $7,524.
Is Knoxville more expensive than the rest of Tennessee?
Not meaningfully. Knoxville prices track the Tennessee average closely.
Do I need a permit in Knoxville?
Most work of this type and value requires a permit. Budget around $350 in Tennessee and allow extra time for review in metro jurisdictions.
How do I compare quotes in Knoxville?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full furnace installation calculator →