Chain Link Fence Cost in Knoxville, TN (2026)

HomeFencingTennessee › Knoxville
Chain Link Fence Cost in Knoxville, TN (2026)
BLS OEWS 2025 wage data · updated August 2026
Knoxville · per linear ft
$11.20 – $27.99

Chain Link Fence costs $11.20 to $27.99 per linear ft in Knoxville in 2026. For a 150-foot run, expect $1,679 – $4,199 installed, typically near $2,939. That is essentially in line with the Tennessee average.

Typical linear ft
$19.59
vs state average
In line
Local construction wage
$26.73
Frost depth
15 in

Knoxville chain link fence calculator

Estimated installed cost

Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.

How Knoxville compares with the rest of Tennessee

Construction wages in Knoxville average $26.73 per hour against $27.17 statewide, so pricing tracks the Tennessee norm closely.

Labor is about 45% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.

Chain Link Fence cost by project size in Knoxville

Project sizeKnoxville rangeTypical
50 ft$560 – $1,400$980
100 ft$1,120 – $2,799$1,959
150 ft$1,679 – $4,199$2,939
200 ft$2,239 – $5,598$3,919
250 ft$2,799 – $6,998$4,898
300 ft$3,359 – $8,397$5,878
400 ft$4,479 – $11,196$7,837
500 ft$5,598 – $13,995$9,797

Where the money goes

For a 150-foot run in Knoxville at roughly $2,939, a typical bill splits like this:

Line itemShareCost
Labor45%$1,323
Materials41%$1,205
Site prep & equipment8%$235
Overhead, disposal & finishing6%$176

Knoxville compared with other Tennessee markets

AreaCost per linear ftvs Knoxville
Nashville$11.51 – $28.77+3%
Memphis$11.28 – $28.19+1%
Chattanooga$11.32 – $28.29+1%
Kingsport$11.10 – $27.75−1%
Tennessee average$11.27 – $28.18+1%

Ground conditions and code in Knoxville

Knoxville sits in IECC zone 4 (mixed) with a design frost depth of about 15 inches. Footings and posts must extend below that line, which adds excavation depth and concrete volume that warm-climate estimates leave out.

Permits in Knoxville

A residential permit for this work typically runs around $350 in Tennessee. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Knoxville building department before work begins.

Hiring in Knoxville

Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Tennessee.

Frequently asked questions

How much does chain link fence cost in Knoxville?

In 2026, chain link fence costs $11.20 to $27.99 per linear ft in Knoxville. For a 150-foot run, the installed total typically lands between $1,679 and $4,199.

Is Knoxville more expensive than the rest of Tennessee?

Not meaningfully. Knoxville prices track the Tennessee average closely.

Do I need a permit in Knoxville?

Most work of this type and value requires a permit. Budget around $350 in Tennessee and allow extra time for review in metro jurisdictions.

How do I compare quotes in Knoxville?

Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.

Nearby markets

Open the full chain link fence calculator →

Methodology. Local pricing applies the Knoxville construction wage from the BLS Occupational Employment and Wage Statistics (2025 release, $26.73/hr) to the labor share of a national 2026 cost baseline. Materials are held at national prices. Figures refresh automatically with each BLS release. Planning estimates, not quotes. See our full methodology.

Leave a Comment