Heat Pump costs $5,374 to $12,702 in Idaho Falls in 2026. For an average 1,800 sq ft home, expect $5,374 – $12,702 installed, typically near $9,038. That is about 2% above the Idaho average.
Idaho Falls heat pump calculator
Planning estimate. Wage index applies to the labor share only; materials held at national prices. Get three written quotes.
Why Idaho Falls runs above the Idaho average
Construction wages in Idaho Falls average $29.53 per hour against $28.31 statewide, so labor-heavy work prices above the Idaho norm here.
Labor is about 38% of the installed cost on this type of work, and it is the part that actually moves between markets. Materials are priced by national manufacturers and barely shift, which is why the gap between metros is narrower than wage differences alone suggest.
Heat Pump cost by project size in Idaho Falls
| Project size | Idaho Falls range | Typical |
|---|---|---|
| 1,000 sq ft home | $2,986 – $7,057 | $5,021 |
| 1,400 sq ft home | $4,180 – $9,880 | $7,030 |
| 1,800 sq ft home | $5,374 – $12,702 | $9,038 |
| 2,200 sq ft home | $6,568 – $15,525 | $11,047 |
| 2,600 sq ft home | $7,763 – $18,348 | $13,055 |
| 3,000 sq ft home | $8,957 – $21,171 | $15,064 |
Where the money goes
For an average 1,800 sq ft home in Idaho Falls at roughly $9,038, a typical bill splits like this:
| Line item | Share | Cost |
|---|---|---|
| Labor | 38% | $3,435 |
| Materials | 48% | $4,338 |
| Site prep & equipment | 8% | $723 |
| Overhead, disposal & finishing | 6% | $542 |
Idaho Falls compared with other Idaho markets
| Area | Cost installed | vs Idaho Falls |
|---|---|---|
| Boise | $5,312 – $12,555 | −1% |
| Coeur d’Alene | $5,355 – $12,658 | 0% |
| Twin Falls | $5,105 – $12,066 | −5% |
| Pocatello | $5,225 – $12,351 | −3% |
| Idaho average | $5,293 – $12,511 | −2% |
Climate and equipment sizing in Idaho Falls
Permits in Idaho Falls
A residential permit for this work typically runs around $400 in Idaho. Permit cost is rarely included in a contractor quote, so budget it separately and confirm scope with the Idaho Falls building department before work begins.
Hiring in Idaho Falls
Get three written, itemised quotes from licensed and insured contractors, each specifying the same scope and grade of material. Ask for local references and check the licence is current in Idaho.
Frequently asked questions
How much does heat pump cost in Idaho Falls?
In 2026, heat pump costs $5,374 to $12,702 in Idaho Falls. For an average 1,800 sq ft home, the installed total typically lands between $5,374 and $12,702.
Is Idaho Falls more expensive than the rest of Idaho?
Yes. Idaho Falls runs about 2% above the Idaho average, because local construction wages ($29.53/hr) sit above the statewide figure of $28.31/hr.
Do I need a permit in Idaho Falls?
Most work of this type and value requires a permit. Budget around $400 in Idaho and allow extra time for review in metro jurisdictions.
How do I compare quotes in Idaho Falls?
Get three written, itemised quotes covering identical scope and materials. A bid far below the others usually signals a reduced specification rather than better value.
Nearby markets
Open the full heat pump calculator →